FS: Heavy Duty Side Yokes
#1
Burning Brakes
Thread Starter
Heavy Duty Side Yokes
I have for sale a pair of Heavy Duty Differential side yokes. These side yokes are not the standard OEM heavy duty yokes I purchased them from Mid America Motorworks a few years back for a project but will not be using them. Asking $600.00 or reasonable offer plus actual shipping cost.
Last edited by Bandit54; 01-07-2019 at 02:55 PM. Reason: photos
The following users liked this post:
bmans vette (01-04-2019)
#3
Tech Contributor
Those are made by International Axle
The following users liked this post:
Bandit54 (01-05-2019)
#4
Burning Brakes
Thread Starter
Gary, thanks for that information I had a couple members asking, also do you by chance know the HP rating on the units I can’t find anything?
#5
Tech Contributor
I don't recall if they were rated but I used a set of those in a build for 500hp last summer. Typically I would have used a 30 spline Tom's axle set but this diff had to appear original. They were dead on for the face dimension,hardened, and very high quality in fact my opinion is they are probably the best 17 spline vette axles sold today. These cost more then the new imported axles and rebuilt axles sold today but are better. I don't care for the fit of the caps though, there were large gaps so I was concerned the cap would be over torqued on the joint caps. You will notice the arrows on the caps as well, stock ones are not directional. I ended up fitting a set of stock caps.
#6
Burning Brakes
Thread Starter
Gary, thanks for the information. I check the fit between the OEM clamps and the clamps that came with the yokes. I see what your saying the OEM clamps fit as they should the others have a gap of around .020 on each side not the ideal fit. I have a extra set of OEM clamps that I will include with the sale that way the choice will be up to the individual installing them.
Last edited by Bandit54; 01-07-2019 at 02:51 PM. Reason: attach photos