WTB: 1970 LT1 power steering pulley
01-06-2019, 08:23 AM
#3
Melting Slicks<br><img src="/forums/images/ranks/3k-4k.gif" border="0">
Member Since: Nov 2002
Location: Jamison Pa
Posts: 2,843
Received 233 Likes
on
179 Posts
St. Jude Donor '11-'24
I didn’t think P/S was available in ‘70 either. I would try the L46 pulley. I do not know if that is different from the L48 setup.
The following users liked this post:
qtrmile2 (01-08-2019)
01-06-2019, 10:29 AM
#4
Safety Car
Member Since: Apr 2007
Location: PHOENIX AZ. WHAT A MAN WON"T SPEND TO GIVE HIS ASS A RIDE
Posts: 3,678
Received 306 Likes
on
220 Posts
PS was NOT a option on 1970 LT-1'S. They had a 6 QT oil pan that would not let the cylinder to clear it. Later GM went to a 5QT pan that would in 71.
01-06-2019, 08:51 PM
#6
Bill is correct as early 70 LT1 did have the power steering option how ever it is up to the owner to prove it was factory installed.
However I have a single grooved pulley that is the same configuration as in the Judging manual. I am not up to par on small blocks just Big block stuff, But is there a stamped number on the 70 Lt1 pulley and if any one knows please post the part number
Thanks, grant
However I have a single grooved pulley that is the same configuration as in the Judging manual. I am not up to par on small blocks just Big block stuff, But is there a stamped number on the 70 Lt1 pulley and if any one knows please post the part number
Thanks, grant
The following users liked this post:
qtrmile2 (01-08-2019)
