When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Trying to clean out the garage some more and get rid of parts I no longer need or plan to use. I have a nice used power steering pitman arm and a good used Saginaw pump body that's missing the fluid reservoir. The pitman arm is in good condition, and is clean. I wire brushed it and recoated it with 2 coats of Plasticote cast iron paint. It's casting number 3741387B, has a couple of pickle fork dings at the small end, and a small flat spot on the big end (see pics). The pump body is from my '67, as I replaced it a while ago with a AGR unit I bought from a member here when I was converting over to rack and pinion steering. The pump was working fine when I removed it. I cleaned it up, cleaned the threads on the front and back, and reshot the front with Krylon 1613 semi-glass black paint. It has a usable nut, the woodruff key is still there, all the o-rings for the front and back for fluid sealing, and the output valve and hose fitting are there. Sorry I had to reuse my fluid reservoir, so that's all that's missing. Asking $25 shipped to your door in the lower 48 United States for the pitman arm, and $30 shipped to your door in the lower 48 United States for the pump body. Best to PM me to claim either or both of these parts. Nice set of spares for road racers or folks on a budget ... I've already done the detailing, LOL ... Thanks for looking!!