anyone need or have qtr. panel retainer metal trim?
#1
Burning Brakes
Thread Starter
Member Since: Aug 2001
Location: I can explain it to you, but I can't comprehend it for ya.
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
anyone need or have qtr. panel retainer metal trim?
I have lost the small arched piece that goes at the top on drivers side. :(
If anyone has one for sale please let me know...or if anyone needs one of the other three pieces maybe we can order a set and work out a deal. I hate to order the whole set for just the one peice that I need ..and would'nt you know it, none of the vendors will sell just that piece.
Any help will be appreciated.
If anyone has one for sale please let me know...or if anyone needs one of the other three pieces maybe we can order a set and work out a deal. I hate to order the whole set for just the one peice that I need ..and would'nt you know it, none of the vendors will sell just that piece.
Any help will be appreciated.
#2
Safety Car
Member Since: Nov 1999
Location: Paducah KY
Posts: 4,466
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude Donor '03
Re: anyone need or have qtr. panel retainer metal trim? (Dwaynes69BB)
I had to buy new ones (they came with both pcs for each side) cause mine only had one side when I got the car. I'll check tonight and see which side I have. If it's right, it's yours. n/c
Dave
Dave
#3
Burning Brakes
Thread Starter
Member Since: Aug 2001
Location: I can explain it to you, but I can't comprehend it for ya.
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Re: anyone need or have qtr. panel retainer metal trim? (Rolling Thunder)
Thank you, Thank You, Thank You,!
#4
Safety Car
Re: anyone need or have qtr. panel retainer metal trim? (Dwaynes69BB)
Dwayne,
I am in a similar predicament. I need the long passenger side one. Maybe I can find one at a junkyard or something. :(
I am in a similar predicament. I need the long passenger side one. Maybe I can find one at a junkyard or something. :(
#5
Burning Brakes
Thread Starter
Member Since: Aug 2001
Location: I can explain it to you, but I can't comprehend it for ya.
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Re: anyone need or have qtr. panel retainer metal trim? (Stewart's74)
Stewart,
If the one Dave has, is not for the drivers side...would you be interested in spliting the cost of a complete set... and each of us getting the peices we need???
If the one Dave has, is not for the drivers side...would you be interested in spliting the cost of a complete set... and each of us getting the peices we need???
#6
Safety Car
Re: anyone need or have qtr. panel retainer metal trim? (Dwaynes69BB)
Dwayne,
Let me call my local Vette Salvage Yard and see what they have. I'll let you know what I find. I just hate to pay retail for this kind of stuff. If I have no luck then I'll most likely split one with you.
Stew
Let me call my local Vette Salvage Yard and see what they have. I'll let you know what I find. I just hate to pay retail for this kind of stuff. If I have no luck then I'll most likely split one with you.
Stew
#7
Safety Car
Re: anyone need or have qtr. panel retainer metal trim? (Dwaynes69BB)
Dwayne,
I just spoke to "The Man".
He said he has them. I will be going there this Friday. $10 per piece. Not bad considering a kit is $40 and we only need one piece each. I'll make sure I get good ones too. Then I'll mail it to you.
Waddaya say, You in?
Let me know,
Stew
I just spoke to "The Man".
He said he has them. I will be going there this Friday. $10 per piece. Not bad considering a kit is $40 and we only need one piece each. I'll make sure I get good ones too. Then I'll mail it to you.
Waddaya say, You in?
Let me know,
Stew
#8
Burning Brakes
Thread Starter
Member Since: Aug 2001
Location: I can explain it to you, but I can't comprehend it for ya.
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Re: anyone need or have qtr. panel retainer metal trim? (Stewart's74)
If Daves piece mentioned above is not for driver side, then yes I'm in...I'll let yu know asap
#9
Safety Car
Member Since: Nov 1999
Location: Paducah KY
Posts: 4,466
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude Donor '03
Re: anyone need or have qtr. panel retainer metal trim? (Dwaynes69BB)
Dwayne - I just dug through my leftovers and could only find the driver's side lower piece. Sorry. If anyone else needs it, let me know.
Dave
Dave
#10
Burning Brakes
Thread Starter
Member Since: Aug 2001
Location: I can explain it to you, but I can't comprehend it for ya.
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Re: anyone need or have qtr. panel retainer metal trim? (Stewart's74)
Dave,
Thanks for checking....
Stewart,
It looks like I will need the part.....(drivers side upper trim) just let me know how you want to handle. you can e-mail me at rd_stroud@yahoo.com or just send IM..
thanx again!
Wish we had a "local Vette salvage Yard" around here. I may need additional parts checked in the future also, if you don't mind. :seeya
[Modified by Dwaynes69BB, 10:34 PM 8/15/2001]
Thanks for checking....
Stewart,
It looks like I will need the part.....(drivers side upper trim) just let me know how you want to handle. you can e-mail me at rd_stroud@yahoo.com or just send IM..
thanx again!
Wish we had a "local Vette salvage Yard" around here. I may need additional parts checked in the future also, if you don't mind. :seeya
[Modified by Dwaynes69BB, 10:34 PM 8/15/2001]
#11
Safety Car
Re: anyone need or have qtr. panel retainer metal trim? (Dwaynes69BB)
Dwayne, No problem.
I'll let you know what I dig up.
Stew :chevy
I'll let you know what I dig up.
Stew :chevy
#12
Safety Car
Re: anyone need or have qtr. panel retainer metal trim? (Stewart's74)
Dwayne,
I have the trim piece. I sent you an e-mail on Friday afternoon but possibly the forum has an incorrect e-mail listed in your profile. I also got your IM today?!?!? Doesn't sound instant to me.
Anyway, it looks brand new. I pulled it off a burned up 75. Brought it home and cleaned it up for you. Send me an e-mail with your address and I'll send it to you. $10.
Cheers,
Stew
I have the trim piece. I sent you an e-mail on Friday afternoon but possibly the forum has an incorrect e-mail listed in your profile. I also got your IM today?!?!? Doesn't sound instant to me.
Anyway, it looks brand new. I pulled it off a burned up 75. Brought it home and cleaned it up for you. Send me an e-mail with your address and I'll send it to you. $10.
Cheers,
Stew