Lowered my '68
08-30-2009, 09:04 AM
#1
Safety Car
Thread Starter
Lowered my '68
Dropped front end abot 2" and rear about 1/2" and also a few other item that need attention last week.
I also did a write-up ===>>
that may help someone it the future.
I also did a write-up ===>>
that may help someone it the future.Before
After
After
08-30-2009, 09:12 AM
#2
Race Director
The car looks great. You really did a nice job with the ride height and you did an even better job with the very helpfull write up. I hope some of the apprehensive people about cutting springs will take the time to read it. It should take a lot of the mystry out. Good job! Thanks. 
08-31-2009, 03:59 PM
#7
Racer
Looks Great.
That looks great. I was wondering do you have any problems with the car bottoming out now that you have lowered it. I jhave always wanted to lower mine but have always been afraid of the unknown. Let me know of any problems that you have encountered since you lowered the car.
08-31-2009, 04:14 PM
#8
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi BM,
The lowered car really does look JUST RIGHT! AND it sure is PRETTY!!!
Regards,
Alan
The lowered car really does look JUST RIGHT! AND it sure is PRETTY!!!
Regards,
Alan
08-31-2009, 04:23 PM
#9
Melting Slicks
beautiful car, nice write up,
if i started a project like that outside, the only thunderstorm in the county would boogie its way over to my location and let loose on me. ha.
if i started a project like that outside, the only thunderstorm in the county would boogie its way over to my location and let loose on me. ha.
