82 EGR question

Reply Subscribe

Thread Tools

Search this Thread

Jan 31, 2010 | 11:26 AM

#21

terry82

Le Mans Master

Joined: Jul 2000

Posts: 6,664

Likes: 162

From: columbia city in

bosch has plenty of heated three wire 02 sensors .any of them should work .

Jan 31, 2010 | 11:32 AM

#22

jdp6000

Melting Slicks

Joined: Jul 2005

Posts: 2,740

Likes: 3

From: Aurora Ontario

Quote:

Originally Posted by terry82

bosch has plenty of heated three wire 02 sensors .any of them should work .

Hey Terry,

Any idea as to how you wire it? Is it plug and play?

Jim

Jan 31, 2010 | 12:52 PM

#23

AT-82Collectors

Thread Starter

Instructor

Joined: Jan 2005

Posts: 172

Likes: 2

From: Cumming GA

Got the Bosch, it has two white wires and one black (A,B and C). The two white wires ohm out to 3.5 ohms but the black does not seem to have a connection or it is greater than 20 meg ohms cold. none of the three wire appears to be connected to the case. Does anyone have a pinout on this sensor?

Jan 31, 2010 | 12:58 PM

#24

jdp6000

Melting Slicks

Joined: Jul 2005

Posts: 2,740

Likes: 3

From: Aurora Ontario

Quote:

Originally Posted by AT-82Collectors

This may help

http://forums.corvetteforum.com/c4-t...o2-sensor.html

Jan 31, 2010 | 01:32 PM

#25

AT-82Collectors

Thread Starter

Instructor

Joined: Jan 2005

Posts: 172

Likes: 2

From: Cumming GA

That will work!

Thank you,
Andy

Jan 31, 2010 | 03:27 PM

#26

jdp6000

Melting Slicks

Joined: Jul 2005

Posts: 2,740

Likes: 3

From: Aurora Ontario

Quote:

Originally Posted by AT-82Collectors

That will work!

Thank you,
Andy

Hopefully that it Andy.

Let us know how it works out.

Jim

Jan 31, 2010 | 04:07 PM

#27

terry82

Le Mans Master

Joined: Jul 2000

Posts: 6,664

Likes: 162

From: columbia city in

good job jpd6000 that thread you found with the diagram should help.

Feb 11, 2010 | 05:49 PM

#28

AT-82Collectors

Thread Starter

Instructor

Joined: Jan 2005

Posts: 172

Likes: 2

From: Cumming GA

Just as a follow up on this code 44 problem, it was going to take me a few days (the next weekend) to be able to install the heated O2 sensor but before I could change it the code 44 went away. I have driven the car for six days now with no errors. The ECM is going into closed loop and the motor is running good.

I am going to change to the heated sensor this weekend. The problem has gone away for now but it may be back and this heated sensor will be cheap insurance and needs to be done. Thanks to all that contributed to this thread for the advice.

Andy