71 L-88 Replica (kinda)
The following users liked this post:
Metalhead140 (04-27-2018)
#502
If you're up for a drive in the morning the locals get together at the Sherwood Hall deli off SW Hall Ln in Alexandria tomorrow morning at 9. BTW - that beast sounds awesome! Any bites on the listing?
#503
Melting Slicks
Thread Starter
Thanks. I will be up next weekend to check it out then bring my car up the next weekend. I have had some interest, but nothing to let me let the car go. I have time.
#505
Melting Slicks
Thread Starter
I went to Katie's today to check it out, certainly some very high end cars there. If the wx is nice next Sat I will drive up with my car. Cheers
#506
Melting Slicks
Thread Starter
I need to have someone cut and TIG my AC adapter so I can get it under the hood brace. I think we can go as low as where the discolor stops on the fitting. Anyone know where I could send it and get it done?. Thanks
#507
Race Director
Rotary compressor with 5-bolt rear plate. Can it be clocked, or is that the only position the back plate can be mounted?
#510
Melting Slicks
Thread Starter
#511
Race Director
Yeah, that is not pipe thread.
#512
Race Director
#514
Do a search for "90-degree female O-ring short drop fittings" there are plenty of short radius fitting you can buy that will do the job.
I would post some links but I'm not sure if I am allowed. I get in enough trouble around here.
I would post some links but I'm not sure if I am allowed. I get in enough trouble around here.
#515
Melting Slicks
Thread Starter
Thanks I am going to have it cut and tig one more time them plan b which is your plan
#518
Melting Slicks
Thread Starter
Nothing earth shattering but I bought a steering wheel/column extension to bring the steering wheel closer and lowered the floor boards about 2 inches. What a difference!!! Also came back from Katies coffee and cars in Falls Church (look it up) and is was nice to see the high end owners, Ferrari, McLaren, AMG, Porsche etc come up to me and wanted to go all over my car. I am still smiling. I have almost 400 miles on her, and redid the suction return fitting for the AC and it looks like I will need to notch the hood unless I can rotate the back plate. I will get up with Vintage Air. Happy fathers day
#519
Melting Slicks
Thread Starter
AC is up and running and I just added 3m film on the front of the rear flares and will begin making a front spoiler. I went to check out the new dominion raceway just down the road from me and it looks "good enough". They had the exotic car day when I was there where they had a few Porsche's, Lamborghini's and Ferrari's there humming around the track. I would like to get out there. cheers
#520
Melting Slicks
Thread Starter
After 500 miles with the Corbeau retractable harness I will pull it for a 5 point harness. Just never seemed to work the way I thought it should and with this car the 5 point is a much better solution and I still can reach all the switches. Pics soon, just ordered the harness.
The following users liked this post:
Metalhead140 (08-26-2018)