anyone have good experience with a good charlotte,nc engine builder?
#1
Burning Brakes
Thread Starter
anyone have good experience with a good charlotte,nc engine builder?
Anyone have good experience with acharlotte,nc engine builder? I am looking to build 350 or 383, probablealuminum heads. Most hp and torgue with enough vacuum for power brakes and a/c. Thanks, any and all input appreciated.
#5
Le Mans Master
Go enjoy some nights of local circle track races and note which shops are doing motor work for the top finishing cars, that should get you headed in the right direction
#6
Melting Slicks
I built the engine myself.....
The advise that SOLID LT1 gave you is a really good direction to go, you'll find out right away who's good and who to stay away from. Remember.....the cheapest engine builder is not generally the best engine builder. Have some fun with your reasearch...
The advise that SOLID LT1 gave you is a really good direction to go, you'll find out right away who's good and who to stay away from. Remember.....the cheapest engine builder is not generally the best engine builder. Have some fun with your reasearch...
#7
Le Mans Master
Member Since: Sep 2001
Location: Unreconstructed, South Carolina
Posts: 7,739
Received 628 Likes
on
556 Posts
due north of raleigh ... just inside VA ... Clarksville VA ... see Kevin Blanks Performance. Plenty top-ten CT motors darken his door.
http://www.blanksperformance.com/contact.htm
* also ... holman moody is right there in charlotte ... they DO sell their own chevy cams of that I'm certain ... check if they'll build you a motor.
http://www.blanksperformance.com/contact.htm
* also ... holman moody is right there in charlotte ... they DO sell their own chevy cams of that I'm certain ... check if they'll build you a motor.
Last edited by jackson; 03-01-2011 at 01:41 PM.
#9
I am an owner of a 1974 Corvette and looking to replace my engine with a 383. I too live in NC.
#10
Instructor
Look up Paul Fitzgerald at Southern Thunder in Concord, he builds all kinds of motors, built me a blown alki 565 Merlin 3 years ago and it has run flawless - great guy won't rip you off. Tell him Roger says hi
#11