C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Today's "What is it?"

Thread Tools
 
Search this Thread
 
Old 03-23-2011, 09:06 AM
  #1  
Augie 79
Racer
Thread Starter
 
Augie 79's Avatar
 
Member Since: Apr 2002
Location: Palmdale Ca
Posts: 268
Received 13 Likes on 10 Posts

Default Today's "What is it?"

Good morning everybody. While under the car (79 L48 coupe) in the area behind the left front tire I noticed a little vacuum device/valve (pic 1, laying on the brake pressure differential valve) of some sort that had become unattached and was hanging by vacuum hose that was still attached. On the back of this device the light blue plastic (the round area) is broken in an area that either attaches the device to the car or is another vacuum port. I think it's another port but I could not find a loose hose. There is also an electrical connector on the device. I traced the hose that is still attached up a T and into the firewall just to the left side of the wiper motor (pic 2). Anybody know what the little device is? As always thanks for reading and offering help.
Augie
Pic 1 Looking Up

Pic 2
Old 03-23-2011, 09:10 AM
  #2  
RonR80
Melting Slicks

 
RonR80's Avatar
 
Member Since: Apr 2008
Location: Russell Ontario
Posts: 2,537
Received 177 Likes on 122 Posts
St. Jude Donor '09

Default

WOW you got me , Ron
Old 03-23-2011, 09:29 AM
  #3  
mysixtynine
Burning Brakes
 
mysixtynine's Avatar
 
Member Since: Dec 2008
Location: Middlesex NJ
Posts: 971
Received 42 Likes on 30 Posts

Default

windshield washer pump

http://www.parts123.com/parts123/yb....5Z5Z50000050G#
Old 03-23-2011, 09:29 AM
  #4  
RU7376vettes
Racer
 
RU7376vettes's Avatar
 
Member Since: Apr 2009
Location: Cincinnati Ohio
Posts: 330
Received 44 Likes on 33 Posts

Default

Windshield washer pump.
Old 03-23-2011, 09:42 AM
  #5  
Augie 79
Racer
Thread Starter
 
Augie 79's Avatar
 
Member Since: Apr 2002
Location: Palmdale Ca
Posts: 268
Received 13 Likes on 10 Posts

Default

Winner winner chicken dinner! We have a tie. Thanks guys! No surprise my windshied washers don't work uh?
Old 03-23-2011, 11:31 AM
  #6  
manfroni
Instructor
 
manfroni's Avatar
 
Member Since: Jun 2010
Location: concord ohio
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts

Default device

what it is: an experimental device that Chevrolet was working on to boost the horse power to over 600. The EPA killed, but lucky you, hook it up and go like hell!
Old 03-23-2011, 01:39 PM
  #7  
Wrencher
Safety Car
 
Wrencher's Avatar
 
Member Since: Oct 1999
Location: NorCal
Posts: 4,083
Likes: 0
Received 8 Likes on 8 Posts

Default

No No, that's not right! It's the Illudium Q-36 Explosive Space Modulator. This car used to belong to to a guy I know named Marvin, watch for the "KABOOM"!

Oh, wait, wrong side. That is the washer!

Hans
Old 03-23-2011, 01:39 PM
  #8  
RonR80
Melting Slicks

 
RonR80's Avatar
 
Member Since: Apr 2008
Location: Russell Ontario
Posts: 2,537
Received 177 Likes on 122 Posts
St. Jude Donor '09

Default

WOW again I have an 80 and it shure does not look like that , another eng. marvel.
You guys are all wrong , that is a winshield DRYER used after heavy rains.

Last edited by RonR80; 03-23-2011 at 01:50 PM.
Old 03-23-2011, 08:13 PM
  #9  
scottyp99
Le Mans Master
 
scottyp99's Avatar
 
Member Since: Mar 2008
Location: Oxford MA-----You just lost the game!!!!
Posts: 5,948
Likes: 0
Received 62 Likes on 52 Posts

Default

You guys are all full of it! Any fool could see that it's a Flux Capacitor! Just make sure it is getting 1.21 gigawatts of power, and be ready for the time warp when you hit 88 miles an hour. Oh, and remember, if you go into the past, don't change anything.......you could endanger your own existence.

P.S. Don't shoot your grandfather, either.


Scott

Get notified of new replies

To Today's "What is it?"




Quick Reply: Today's "What is it?"



All times are GMT -4. The time now is 07:57 PM.