EDM Solid Lifters Review
10-27-2011, 05:26 PM
#1
Burning Brakes
Thread Starter
EDM Solid Lifters Review
Installed these [IMG]
[/IMG] back in August along with a Crower 00320 cam and SS roller rockers & poly locks.Decided to check valve lash to see if all was good.I'm happy to report that the lash hasn't changed since initial fire-up,300 miles.I'm surprised how quiet the solid lifters really are! It may be due to the roller rockers?
I advanced the cam 4 deg for better low end torque.Engine really came alive with the solids, it seems to rev up a lot quicker.So far very happy with the performance of this setup.Will check the lash on the next oil change and report any changes.
[/IMG] back in August along with a Crower 00320 cam and SS roller rockers & poly locks.Decided to check valve lash to see if all was good.I'm happy to report that the lash hasn't changed since initial fire-up,300 miles.I'm surprised how quiet the solid lifters really are! It may be due to the roller rockers? I advanced the cam 4 deg for better low end torque.Engine really came alive with the solids, it seems to rev up a lot quicker.So far very happy with the performance of this setup.Will check the lash on the next oil change and report any changes.
