Power brake vacuum hose
02-03-2013, 01:16 PM
Racer
Thread Starter
Member Since: Apr 2011
Posts: 459
Power brake vacuum hose
Hi , does anybody knows the difference between GM 342411 and GM 354698?
02-03-2013, 11:35 PM
Racer
Member Since: May 2007
Location: Cherry Hill N.J.
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
The 342411 and 354698 are both 11/32 pipes with a fitting on one end used from carb to power brake booster
Hope this helps.......
Last edited by BHRIG; 02-03-2013 at 11:46 PM .
Reason: correction
02-04-2013, 01:18 PM
Racer
Thread Starter
Member Since: Apr 2011
Posts: 459
Hi thanks yes I know, but is the same item?
02-04-2013, 01:44 PM
Racer
Member Since: May 2007
Location: Cherry Hill N.J.
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
GM lists both as being same...............possibly different manufactuers
02-04-2013, 01:57 PM
Burning Brakes
Member Since: Dec 2010
Location: CA
Posts: 825
Likes: 0
Looks like the only real difference is the mounting bracket configuration. And even that's not a lot.
1974 only
342411
1975-1976
354698
Ed
02-04-2013, 06:07 PM
Melting Slicks
Member Since: Mar 2007
Location: Hinckley OH
Posts: 2,520
Likes: 0
Quote:
Originally Posted by
restoman1
Looks like the only real difference is the mounting bracket configuration. And even that's not a lot.
1974 only
342411
1975-1976
354698
Ed
The fitting that screws into the carb is much longer on one.
02-05-2013, 11:00 AM
Racer
Thread Starter
Member Since: Apr 2011
Posts: 459
Quote:
Originally Posted by
my 76 ray
The fitting that screws into the carb is much longer on one.
Yes thanks everybody! I confirm the mounting bracket of the 74 is about 3/8 in longer, this is the only differrence between the two tubes!