fuel return line????
Thread Starter
Racer
Joined: Jan 2013
Posts: 302
Likes: 2
From: Sayville New york
just below the valve cover (out of photo) i bolted a aluminum plate to the two bottom holes in front of AFR heads.i made two separate clamps to hold feed and return fuel lines.-----------very good eye!
Thread Starter
Racer
Joined: Jan 2013
Posts: 302
Likes: 2
From: Sayville New york
you guys form a common bond, a brotherhood! some people are just deep down good brothers and go out of there way to help people whom ask for help.others sit in loneliness all day and never know the feeling of helping others without financial. reward.best day of my life was coming home from war and volunteer for fire dept.i ran into a burning house and came out with a 4 yo child in my turn out gear.to this day deep down far better then world championship.------amen
Last edited by Captain bob; Feb 3, 2015 at 09:38 PM.
Race Director
Joined: Apr 2009
Posts: 19,294
Likes: 2,753
From: Charlotte NC
you guys form a common bond, a brotherhood! some people are just deep down good brothers and go out of there way to help people whom ask for help.others sit in loneliness all day and never know the feeling of helping others without financial. reward.best day of my life was coming home from war and volunteer for fire dept.i ran into a burning house and came out with a 4 yo child in my turn out gear.to this day deep down far better then world championship.------amen
I try my best to look and find any possible problem so a person doing a job does not have a problem. That is what I do every day at my shop. Find potential problems and correct them. So you writing that I have a "very good eye''...lets me know that there are some people here on the forum that understand that all I am trying to do it look out for their BEST interests....and NOT make a custom installation of parts be any harder to do.
DUB
