March 76 L48 Spark Plug Heat Shields
#1
Racer
Thread Starter
Member Since: Nov 2014
Location: Flemington New Jersey
Posts: 269
Likes: 0
Received 1 Like
on
1 Post
March 76 L48 Spark Plug Heat Shields
I was getting around to changing my wires. I have the Ignition Shield and the two Horizontal shields. I have a single bracket bolted to the drivers side manifold and two of the same brackets bolted to the rear passengers manifold. There is no heat shielding anywhere.
I have the AIM and 64-3 shows shields on the front of the manifolds on both sides but none on the rear. (Detail B)
When I go to Paragon, they show part 3383 but that's only the drivers front shield.
I am totally baffled as to what belongs on the car as it was shipped.
Any help would be greatly appreciated.
I have the AIM and 64-3 shows shields on the front of the manifolds on both sides but none on the rear. (Detail B)
When I go to Paragon, they show part 3383 but that's only the drivers front shield.
I am totally baffled as to what belongs on the car as it was shipped.
Any help would be greatly appreciated.