C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Fuel pump connection lines

Thread Tools
 
Search this Thread
 
Old 05-03-2016, 02:10 PM
  #1  
CiCiC3
Racer
Thread Starter
 
CiCiC3's Avatar
 
Member Since: Aug 2011
Location: Charlotte NC
Posts: 362
Received 12 Likes on 12 Posts

Default Fuel pump connection lines

I have stock fuel pump on a '74 that has 3 lines connected. There 2 lines running from the gas tank, one is larger and the other smaller. Are these both feeding the pump or is the small one a return line possibly? Thanks!
Old 05-03-2016, 02:31 PM
  #2  
Alan 71
Team Owner
 
Alan 71's Avatar
 
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes on 2,515 Posts

Default

Hi cc,
The smaller line is a return line as you surmised.
Regards,
Alan
The following users liked this post:
CiCiC3 (05-03-2016)
Old 05-03-2016, 02:46 PM
  #3  
GUSTO14
Le Mans Master
 
GUSTO14's Avatar
 
Member Since: Sep 2003
Location: eastern NC
Posts: 8,801
Received 1,962 Likes on 1,283 Posts

Default

Originally Posted by CiCiC3
I have stock fuel pump on a '74 that has 3 lines connected. There 2 lines running from the gas tank, one is larger and the other smaller. Are these both feeding the pump or is the small one a return line possibly? Thanks!
If you are planning to replace the rubber hoses from the frame to the pump, be sure you get the correct molded hose. Many will simply replace an old hose with standard rubber fuel hose and find that try as they might to route them, most will kink and restrict fuel flow.

GM Part Number: 3994298
Molded “S” hose kit, fuel pump inlet from long line to pump (w/long fuel pump) w/clamps 6154.
Years 1970 - 1981

photo courtesy of Paragon Corvette Reproductions
https://www.paragoncorvette.com/p-35...-hose-kit.aspx

The return, vapor line can use standard 1/4" fuel hose however.
GM Part Number: 3867164
Vapor return hose kit, 1/4" hose w/clamps 9744. 1968-81 All, exc. 1968-69 3x2, L-88 and 1973-74 w/454.
Years 1968 - 1981

photo courtesy of Paragon Corvette Reproductions
https://www.paragoncorvette.com/p-35...-hose-kit.aspx

Good luck... GUSTO
The following users liked this post:
CiCiC3 (05-03-2016)
Old 05-03-2016, 10:34 PM
  #4  
CiCiC3
Racer
Thread Starter
 
CiCiC3's Avatar
 
Member Since: Aug 2011
Location: Charlotte NC
Posts: 362
Received 12 Likes on 12 Posts

Default

Originally Posted by GUSTO14
If you are planning to replace the rubber hoses from the frame to the pump, be sure you get the correct molded hose. Many will simply replace an old hose with standard rubber fuel hose and find that try as they might to route them, most will kink and restrict fuel flow.

GM Part Number: 3994298
Molded “S” hose kit, fuel pump inlet from long line to pump (w/long fuel pump) w/clamps 6154.
Years 1970 - 1981

photo courtesy of Paragon Corvette Reproductions
https://www.paragoncorvette.com/p-35...-hose-kit.aspx

The return, vapor line can use standard 1/4" fuel hose however.
GM Part Number: 3867164
Vapor return hose kit, 1/4" hose w/clamps 9744. 1968-81 All, exc. 1968-69 3x2, L-88 and 1973-74 w/454.
Years 1968 - 1981

photo courtesy of Paragon Corvette Reproductions
https://www.paragoncorvette.com/p-35...-hose-kit.aspx

Good luck... GUSTO
Yes a molded one is what I need and will order now on ebay. This is a smelly job I'm finding out Thanks for the tip.

Get notified of new replies

To Fuel pump connection lines




Quick Reply: Fuel pump connection lines



All times are GMT -4. The time now is 09:10 AM.