C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Engine harness question.

Thread Tools
 
Search this Thread
 
Old 05-18-2016, 04:36 AM
  #1  
Vaipulu
Advanced
Thread Starter
 
Vaipulu's Avatar
 
Member Since: May 2016
Posts: 61
Likes: 0
Received 1 Like on 1 Post
Default Engine harness question.

1974 sbc L82



I have two wires, blue and yellow coming out of my new harness with barrel style connectors . Diagrams say it goes my windshield washer pump, however I don't see the place where they connect. After googling other c3 engine bays I can see on their vette where it goes but I have no such connector on mine. Any direction or pictures would be much appreciated.
Old 05-18-2016, 06:24 AM
  #2  
Alan 71
Team Owner
 
Alan 71's Avatar
 
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes on 2,515 Posts

Default

Hi V,
Here are the blue/yellow connections for 71.
It's likely that for 74 they're in the same area but may not come in from the sides like these do.
Good Luck!
Regards,
Alan

Old 05-19-2016, 04:33 AM
  #3  
Vaipulu
Advanced
Thread Starter
 
Vaipulu's Avatar
 
Member Since: May 2016
Posts: 61
Likes: 0
Received 1 Like on 1 Post
Default

Thanks for the reply Alan! Here is what I'm working with. Sorry for the bad quality photo.

Old 05-19-2016, 05:19 AM
  #4  
redcruz1120
Drifting
 
redcruz1120's Avatar
 
Member Since: Feb 2007
Location: Pearland Texas
Posts: 1,498
Received 205 Likes on 122 Posts
St. Jude Donor '09

Default

Originally Posted by Vaipulu
Thanks for the reply Alan! Here is what I'm working with. Sorry for the bad quality photo.

I have a 1974 and my washer pump look nothing like that! Is there washer hoses anywhere? I dont see them

Last edited by redcruz1120; 05-19-2016 at 05:24 AM.
Old 05-19-2016, 05:22 AM
  #5  
Vaipulu
Advanced
Thread Starter
 
Vaipulu's Avatar
 
Member Since: May 2016
Posts: 61
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by redcruz1120
I have a 1974 and my washer pump look nothing like that!
.... I've never been so happy to hear something was wrong on my car.... I thought I was loosing it. I've read so many diagrams trying to figure it out. I'll have to look into finding the correct part. Thank you.

Get notified of new replies

To Engine harness question.




Quick Reply: Engine harness question.



All times are GMT -4. The time now is 06:57 PM.