Hood release cable broken
#2
Racer
Re: Hood release cable broken (Kansas '73)
Not sure on a 73 but there should be a hole below the wipers to access the latches to get it open..that is where they are on my 81. Hope this helps and I'm sure someone with a 73 will chime in. GoodLuck.
YBNormal...drive a vette
www.angelfire.com/al/swhite7/doug.html
YBNormal...drive a vette
www.angelfire.com/al/swhite7/doug.html
#3
Re: Hood release cable broken (Kansas '73)
Hope this helps: http://www.corvettefaq.com/redir.asp?site=190
-terry
-terry
#4
Re: Hood release cable broken (Kansas '73)
Kansas '73, the last time I answered one of these posts it was deleted. Some people are afraid the wrong people will see how to "break" into our vettes. That Mad Vette article showes a '78. The release is different for your '73. Email me and I can help you.
Steve Grodin
vette74@pacbell.net
Steve Grodin
vette74@pacbell.net
#5
Drifting
Re: Hood release cable broken (Ybnormal)
QUOTE: Not sure on a 73 but there should be a hole below the wipers to access the latches to get it open..that is where they are on my 81. Hope this helps and I'm sure someone with a 73 will chime in. GoodLuck.
Take a look at the repair maual or the AIM to see the layout of the latches. You can feel the center pivot point and reach it.
Take a look at the repair maual or the AIM to see the layout of the latches. You can feel the center pivot point and reach it.
#6
Burning Brakes
Member Since: Aug 2001
Location: Bay City MI.
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hood release cable broken (Steve Grodin)
Steve, I was checking out the info on how to use a screwdriver to open the hood, but on my 71 coupe it does not look like that at all. Any ideas or help would be great. PS My hood works but I would like to know just in case it happens! Tom