Help wiring up my new Starter? Made a beginner's mistake
#1
Racer
Thread Starter
Help wiring up my new Starter? Made a beginner's mistake
So my old starter is bad (Auto '75 w/ sbc) and I took it off to replace it with a new one. I'm totally new to working with anything electrical and made the total beginner mistake of not checking what was wired where before I took off the old starter.
I have a thick black wire that I know goes to the big stud on the starter (12v constant I think?)
But I also have these two. I can't seem to find a reliable source on which stud to attach them to. One is a single wire (Orange with some sort of connector). The other is two orange wires on a single link and they both look to have fusible links in them.
http://imgur.com/1X11pwK
There is a picture of the wires, all orange in color. Any help is much appreciated
I have a thick black wire that I know goes to the big stud on the starter (12v constant I think?)
But I also have these two. I can't seem to find a reliable source on which stud to attach them to. One is a single wire (Orange with some sort of connector). The other is two orange wires on a single link and they both look to have fusible links in them.
http://imgur.com/1X11pwK
There is a picture of the wires, all orange in color. Any help is much appreciated
Last edited by Shdggsdv; 09-13-2016 at 06:21 PM.
#3
Racer
Thread Starter