4speed muncie removal
Thread Starter
Intermediate
Joined: Oct 2016
Posts: 46
Likes: 0
HUGE, YUGE caution, about jackstands and ASSfault driveways/roads never trust any ASSfault surface, I had a car bend over sideways on the stands once, some years ago, and it bent hell outta the steering linkage I was working on....just lucky as hell I was not under it.....jack stands are fine on a garage floor/driveway...but NEVER trust any ASSfault to support ANY car on jack stands.....OR for that matter even a floor jack.....
serious, this comment really needs to be a sticky up top.....when that car went over, I about crapped my britches.....it was a race to the bath room.......:ack::toetap::smash::crazy::c razy2:
serious, this comment really needs to be a sticky up top.....when that car went over, I about crapped my britches.....it was a race to the bath room.......:ack::toetap::smash::crazy::c razy2:
6th Gear
Joined: Mar 2019
Posts: 6
Likes: 1
From: Mt Pleasant, SC
This forum has been great! I'm down to the last 4 bolts on my Muncie 4 speed and possibly pulling it today or tomorrow by myself. M20 is leaking and has picked up a very noticeable amount of whine in 1st, 2nd and 3rd gears. Spoke with the Muncieman in Pennsylvania and he's ready and willing to do the rebuild.Gonna drive it up there from Charleston to meet him. Will also visit some relatives in Carlisle. Will update all after more is done.
