12 bolt conversion
#161
Burning Brakes
Thread Starter
I transferred this over from the under the Christmas tree thread! You can see I had the Super 10 post on a lathe, but haven't started contouring the windows etc yet toward polishing!
On the 12 bolt set up, I was grinding to polish the old fashion way, but only started that! Some pieces aren't in the picture!
"""
And from the Garage are Current projects I have out that I would like to get finished for Christmas!
In the back is the 12-Bolt Conversion with the last set sold from Tom's of true 4340 steel 30 spline inner & outer Axles in 1480 u-joint size! Going in my C2 Racer!
The front unit is a Super 10-Bolt with 30 spline inner and outer Axles in 1350 u-joint size and I have the Billet bolt on u-joint plates, but forgot to show those here! Going in my C3 Autocross car!
Well actually I have one 1480 and a 1350 in the front and back on each in the picture!
I already have another Super 10 in the race car, but moving that into a 3rd C2 Slalom car I have!
Heat treated spiders, and special crossshafts, etc., All drilled for 1/2 inch long studs!
A Virgin never used 1972 4-series case for the 12-bolt!
The sign is the actual shop rate sign out of Guldstrands second to last shop!
Hope everyone else can add more cool stuff to your rides! """"
On the 12 bolt set up, I was grinding to polish the old fashion way, but only started that! Some pieces aren't in the picture!
"""
And from the Garage are Current projects I have out that I would like to get finished for Christmas!
In the back is the 12-Bolt Conversion with the last set sold from Tom's of true 4340 steel 30 spline inner & outer Axles in 1480 u-joint size! Going in my C2 Racer!
The front unit is a Super 10-Bolt with 30 spline inner and outer Axles in 1350 u-joint size and I have the Billet bolt on u-joint plates, but forgot to show those here! Going in my C3 Autocross car!
Well actually I have one 1480 and a 1350 in the front and back on each in the picture!
I already have another Super 10 in the race car, but moving that into a 3rd C2 Slalom car I have!
Heat treated spiders, and special crossshafts, etc., All drilled for 1/2 inch long studs!
A Virgin never used 1972 4-series case for the 12-bolt!
The sign is the actual shop rate sign out of Guldstrands second to last shop!
Hope everyone else can add more cool stuff to your rides! """"
Good luck with your builds
The following users liked this post:
TCracingCA (12-03-2017)
#162
Race Director
Member Since: Nov 2006
Location: Athens GA
Posts: 19,446
Received 351 Likes
on
304 Posts
St. Jude Donor '12-'13, '15- '16-'17-'18-'19, '21
I transferred this over from the under the Christmas tree thread! You can see I had the Super 10 post on a lathe, but haven't started contouring the windows etc yet toward polishing!
On the 12 bolt set up, I was grinding to polish the old fashion way, but only started that! Some pieces aren't in the picture!
"""
And from the Garage are Current projects I have out that I would like to get finished for Christmas!
In the back is the 12-Bolt Conversion with the last set sold from Tom's of true 4340 steel 30 spline inner & outer Axles in 1480 u-joint size! Going in my C2 Racer!
The front unit is a Super 10-Bolt with 30 spline inner and outer Axles in 1350 u-joint size and I have the Billet bolt on u-joint plates, but forgot to show those here! Going in my C3 Autocross car!
Well actually I have one 1480 and a 1350 in the front and back on each in the picture!
I already have another Super 10 in the race car, but moving that into a 3rd C2 Slalom car I have!
Heat treated spiders, and special crossshafts, etc., All drilled for 1/2 inch long studs!
A Virgin never used 1972 4-series case for the 12-bolt!
The sign is the actual shop rate sign out of Guldstrands second to last shop!
Hope everyone else can add more cool stuff to your rides! """"
On the 12 bolt set up, I was grinding to polish the old fashion way, but only started that! Some pieces aren't in the picture!
"""
And from the Garage are Current projects I have out that I would like to get finished for Christmas!
In the back is the 12-Bolt Conversion with the last set sold from Tom's of true 4340 steel 30 spline inner & outer Axles in 1480 u-joint size! Going in my C2 Racer!
The front unit is a Super 10-Bolt with 30 spline inner and outer Axles in 1350 u-joint size and I have the Billet bolt on u-joint plates, but forgot to show those here! Going in my C3 Autocross car!
Well actually I have one 1480 and a 1350 in the front and back on each in the picture!
I already have another Super 10 in the race car, but moving that into a 3rd C2 Slalom car I have!
Heat treated spiders, and special crossshafts, etc., All drilled for 1/2 inch long studs!
A Virgin never used 1972 4-series case for the 12-bolt!
The sign is the actual shop rate sign out of Guldstrands second to last shop!
Hope everyone else can add more cool stuff to your rides! """"
The following users liked this post:
TCracingCA (12-03-2017)
The following users liked this post:
bowtie racing (05-07-2019)
The following users liked this post:
76strokervette (02-08-2018)
The following users liked this post:
76strokervette (02-08-2018)
#167
Team Owner
Still following thread!
I like custom and quality, cool piece!!!
I like custom and quality, cool piece!!!
The following users liked this post:
76strokervette (02-11-2018)
#171
Burning Brakes
Thread Starter
You will probably get to see most of the new parts on this thread.
I am glad you are near the finish line now. Then it will be time to get your car finished and see what it will take!
Dave
I am glad you are near the finish line now. Then it will be time to get your car finished and see what it will take!
Dave
#179
Burning Brakes
Thread Starter
Ring gear flange will be significantly thicker than any previous build
due to new clearance methods and parts. The carrier is getting shot
peened and polished. The final assembly gears are rem polished as are the spider gears. Final assembly pics coming soon.
due to new clearance methods and parts. The carrier is getting shot
peened and polished. The final assembly gears are rem polished as are the spider gears. Final assembly pics coming soon.
#180
Burning Brakes
Thread Starter
Pictures of carrier machining. Final mock up then to shot peen and polish followed by final assembly.
Last edited by 76strokervette; 04-26-2018 at 08:12 AM.