Headers for 69 350 corvette coupe
#1
Headers for 69 350 corvette coupe
I have a 69 corvette coupe. I'm looking to install some type of huger shorty headers on the car. air pump disconnected and lines are blocked in the existing manifolds. I need the headers to bolt up to my existing exhaust manifold pipes as the are brand new and I really don't want to cut them ,Any help guy's or suggestions would be greatly appreciated.Thanks. Ronnie D.
#2
what do you think your going to gain from shorty headers? No performance increase.
#3
This is a common question. Make sure to do a search.
The short version is there the factory 81/82 and early C4 manifolds but they do require welding the AIR ports shut.
In the aftermarket there are a couple units that look very close to fitting the stock exhaust flange/donut. A quick search shows these threads.....
https://www.corvetteforum.com/forums...k-exhaust.html
https://www.corvetteforum.com/forums...t-headers.html
https://www.corvetteforum.com/forums...t-headers.html
The short version is there the factory 81/82 and early C4 manifolds but they do require welding the AIR ports shut.
In the aftermarket there are a couple units that look very close to fitting the stock exhaust flange/donut. A quick search shows these threads.....
https://www.corvetteforum.com/forums...k-exhaust.html
https://www.corvetteforum.com/forums...t-headers.html
https://www.corvetteforum.com/forums...t-headers.html
Last edited by Dynra Rockets; 02-16-2018 at 05:56 PM.