C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Newbie here !!!

Old 03-16-2018, 09:33 PM
  #1  
flatcroaker
3rd Gear
Thread Starter
 
flatcroaker's Avatar
 
Member Since: Mar 2018
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Newbie here !!!

bought a 77 that had been in a fire ! been a long road but i am finally gettin close to drivin it on the street i hope !! eng and trans survived flames and thats about all. new used body is YELLOW , ewww. lol. all i could find at the time. its a long boring story so i will cut to the chase, had to replace radiator and trans fluid last thing i did. wondering how much fluid will i need to buy to fill it. have put a gallon in it so far how much more do i need? b4 anyone gets wise and says the obvious , as much as it takes right , lol. trans is a 350 eng also 350. stock radiator was bought new. anyone tell me how much rad holds as trans lines are hooked to it. auto trans btw. any and all help is appreciated and hello to everyone !!! im in mo. btw.

Last edited by flatcroaker; 03-16-2018 at 09:57 PM. Reason: add location
Old 03-16-2018, 10:57 PM
  #2  
FX VETTE
Team Owner
 
FX VETTE's Avatar
 
Member Since: Jul 2016
Location: The Steel City, Colorful Colorado
Posts: 25,306
Received 1,679 Likes on 1,182 Posts
Winner 2020 C7 of the Year - Modified
Default

Welcome to the CF!
Old 03-16-2018, 11:21 PM
  #3  
Vetteman Jack
Administrator

Support Corvetteforum!
 
Vetteman Jack's Avatar
 
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,636
Received 19,200 Likes on 13,918 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran


Default

Going to move this over to the C3 Tech section so you don't have to re-post this in that section.
Old 03-16-2018, 11:34 PM
  #4  
flatcroaker
3rd Gear
Thread Starter
 
flatcroaker's Avatar
 
Member Since: Mar 2018
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default thanks

vj thanks for moving . i got a lil carried away w intro. lol. ae guy thanks to you also.
Old 03-16-2018, 11:56 PM
  #5  
Alwyn678
Team Owner
 
Alwyn678's Avatar
 
Member Since: Jun 2001
Location: Thomson Georgia
Posts: 43,085
Received 141 Likes on 124 Posts

Default

Welcome!! There is a Lot of Knowledge and Experience here.
Old 03-17-2018, 02:02 AM
  #6  
Bikespace
Le Mans Master
 
Bikespace's Avatar
 
Member Since: Mar 2017
Location: Northern Virginia
Posts: 9,026
Received 3,133 Likes on 2,325 Posts
Default

Between 2 and 3 gallons for radiator fluid, I think (EDIT: more like 4-5 gallons, if starting from completely empty). I put in a gallon of concentrate, then a gallon of de-ionized or distilled water (NOT purified water), then more concentrate. I fill at the water neck, then radiator, and do a few short test drives to burp all of the air out of the system.

Trans fluid, EDIT: Lots. I haven't done a complete fluid change, but it doesn't go bad, so stock up. You'll probably need a few quarts of power steering fluid to get you through the summer, too.

Welcome aboard, and please post some pictures!

Last edited by Bikespace; 03-17-2018 at 01:48 PM. Reason: Way off on trans fluid guess.
Old 03-17-2018, 04:41 AM
  #7  
riverracer au
Melting Slicks
 
riverracer au's Avatar
 
Member Since: Oct 2010
Location: "ɹǝpunuʍop", Adelaide, South Australia
Posts: 2,170
Received 290 Likes on 177 Posts

Default

Originally Posted by flatcroaker
body is YELLOW , ewww.
that's not a very nice thing to say around here...
Old 03-17-2018, 11:17 AM
  #8  
BKbroiler
Le Mans Master
 
BKbroiler's Avatar
 
Member Since: May 2002
Location: Lebanon Township New Jersey
Posts: 5,005
Received 706 Likes on 401 Posts

Default

Starting from zero coolant in engine and rad it will take about 4 gallons.
Old 03-17-2018, 11:37 AM
  #9  
c3_dk
Safety Car
 
c3_dk's Avatar
 
Member Since: Jan 2008
Location: Aarhus, Denmark
Posts: 3,696
Received 381 Likes on 294 Posts

Default

Welcome to the forum :- )
Old 03-17-2018, 12:00 PM
  #10  
John 65
Le Mans Master
 
John 65's Avatar
 
Member Since: Dec 2003
Location: N J
Posts: 5,347
Received 402 Likes on 325 Posts

Default

Welcome to the forum

Another 77 fan here. PICS PICS PICS !
Old 03-17-2018, 01:45 PM
  #11  
drwet
Melting Slicks
 
drwet's Avatar
 
Member Since: Dec 2009
Location: Thunder Bay
Posts: 3,040
Received 538 Likes on 413 Posts

Default

Factory specs for my '79 are 10 US quarts of trans fluid, and 21 US quarts of coolant to fill. I'm pretty sure your 77 will be the same.
Old 03-17-2018, 01:58 PM
  #12  
flatcroaker
3rd Gear
Thread Starter
 
flatcroaker's Avatar
 
Member Since: Mar 2018
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Thanks

thank u all for well wishes and advice. replace carb (stock) w/edelbrock intake and carb (4 bbl) ran ok b4 but when i put it in gear it stalls w/backfire from carb why is that . now what have i done ? idles fine , timing adj correctly ,new plugs and wires no vac leaks ! what am i missing ? help1
Old 03-18-2018, 05:24 PM
  #13  
Indiancreek
Drifting
Support Corvetteforum!
 
Indiancreek's Avatar
 
Member Since: Jun 2010
Location: Oxford Ohio
Posts: 1,781
Received 13 Likes on 9 Posts

Default

Welcome aboard.
Old 03-19-2018, 02:29 PM
  #14  
See 3
Instructor
 
See 3's Avatar
 
Member Since: Aug 2017
Location: Jacksonville Florida
Posts: 180
Received 24 Likes on 22 Posts
Default

Originally Posted by flatcroaker
used body is YELLOW , ewww. lol.
Yellow is a cool color for a 70's car.............
Old 03-22-2018, 07:11 AM
  #15  
Indiancreek
Drifting
Support Corvetteforum!
 
Indiancreek's Avatar
 
Member Since: Jun 2010
Location: Oxford Ohio
Posts: 1,781
Received 13 Likes on 9 Posts

Default

I picked up a 75 that's yellow, figured on painting it another color. The longer I looked at it the more I liked it. To the point I think i'll paint a 68 Camaro I have yellow too.

Get notified of new replies

To Newbie here !!!



Thread Tools
Search this Thread
Quick Reply: Newbie here !!!



All times are GMT -4. The time now is 09:00 PM.