Show Us Your Engines
The following users liked this post:
YellowEarl (02-12-2023)
The following users liked this post:
YellowEarl (02-12-2023)
The following users liked this post:
YellowEarl (02-12-2023)
#105
Does this count.
James
The following users liked this post:
YellowEarl (02-12-2023)
#106
Race Director
Thread Starter
Sure does!
That's what we want to see.
That's what we want to see.
The following 2 users liked this post by Crimson Thunder:
OldCarBum (10-07-2018),
YellowEarl (02-12-2023)
The following 2 users liked this post by metal tech:
OldCarBum (12-18-2018),
YellowEarl (02-12-2023)
#109
Race Director
Thread Starter
Should be an interesting build.
#113
The following users liked this post:
YellowEarl (02-12-2023)
#114
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,441
Received 6,289 Likes
on
3,918 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
https://www.bing.com/images/search?view=detailV2&ccid=NBzGU6Rt&id=CE 00BE33B3F6DB79E6FAAADB707A6A51B1100BD2&t hid=OIP.NBzGU6RtMFAqU_rweWzfXAHaHa&media url=https%3a%2f%2fwww.mooneyesusa.com%2f v%2fvspfiles%2fphotos%2fWEB19600060-2T.jpg&exph=300&expw=300&q=dcoe+cross+dr aft+weber&simid=608035331712748829&selec tedIndex=0&ajaxhist=0
Last edited by Rescue Rogers; 12-18-2018 at 06:35 PM.
The following users liked this post:
YellowEarl (02-12-2023)
The following users liked this post:
YellowEarl (02-12-2023)
The following users liked this post:
YellowEarl (02-12-2023)
#117
Race Director
looks like big block cross draft weber manifold. Strip it or paint it aluminum and it will look nice
https://www.bing.com/images/search?v...x=0&ajaxhist=0
https://www.bing.com/images/search?v...x=0&ajaxhist=0
bolded ,,,,agree
Above is kind of cool looking:-)... but i do not think it is the same intake.. the chrome one you posted looks like a lot lower profile.
where as the blue one looks more.... well... not as clean and refined.
The following users liked this post:
YellowEarl (02-12-2023)
#118
Race Director
Member Since: Apr 2011
Location: North of Toronto - Ontario
Posts: 10,853
Received 3,138 Likes
on
2,069 Posts
Nothing really special but it's all I got
Last year's version, a few more tweaks this winter hopefully
M
Last year's version, a few more tweaks this winter hopefully
M
#119
It is a Crossram set up for FI not webers. The plates on the end had plenum boxes bolted to it with dual throttle bodies on the front. The studs on top hold the fuel rail and you can see the injector hole on the last pic to the left side of the #7 runner. It was originally on a twin turbo boat engine. That other pic with webers is a SBC manifold, that's why they don't look the same
Last edited by metal tech; 12-18-2018 at 07:59 PM. Reason: clarification
The following users liked this post:
YellowEarl (02-12-2023)
The following users liked this post:
YellowEarl (02-12-2023)