MSD Blaster 2 coil
#1
Racer
Thread Starter
MSD Blaster 2 coil
I was given a used MSD Blaster 2 (PN 8202)coil (thrown in with a distributor purchase)...
Is there a way to bench test the coil to confirm it is good before I get to the installation only to find out I have to make a parts run?
Is there a way to bench test the coil to confirm it is good before I get to the installation only to find out I have to make a parts run?
#2
Drifting
As I recall, I got the ohm specs from the MSD website and checked with an ohm meter. Pretty straight forward.
Try this:
https://www.msdperformance.com/blog/...oubleshooting/
Try this:
https://www.msdperformance.com/blog/...oubleshooting/
Last edited by flyeri; 04-26-2018 at 08:35 AM.
The following users liked this post:
keithl1967 (04-26-2018)
#4
Drifting
https://www.corvetteforum.com/forums...ion-coils.html
#5