Ammeter pegs at +40
#1
Melting Slicks
Thread Starter
Ammeter pegs at +40
My ammeter is pegging at +40 with ign off, ign on, engine running and even with batt disconnected.
Is it toast ? Is there a way to test ?
Thanks !!!!
DC3
Is it toast ? Is there a way to test ?
Thanks !!!!
DC3
#2
Melting Slicks
Thread Starter
Not exactly sure why, but I think the ammeter is dead. I put a clamp on style real ammeter on battery and the readings are normal. #strange
#3
Le Mans Master
Member Since: Aug 2006
Location: mount holly NC
Posts: 6,989
Received 1,246 Likes
on
966 Posts
C3 of Year Finalist (appearance mods) 2019
Testing the battery gauge.
Connect a GROUND to the TOP terminal and momentarily apply 12 volts to the BOTTOM terminal.
The needle should deflect downward.
Connect a GROUND to the BOTTOM terminal and momentarily apply 12 volts to the TOP terminal.
The needle should deflect UPWARD.
The needle should deflect downward.
Connect a GROUND to the BOTTOM terminal and momentarily apply 12 volts to the TOP terminal.
The needle should deflect UPWARD.