C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Need a stiffer rear spring.

Thread Tools
 
Search this Thread
 
Old 07-06-2018, 07:48 PM
  #21  
cagotzmann
Melting Slicks
Thread Starter
 
cagotzmann's Avatar
 
Member Since: Jun 2011
Posts: 2,960
Received 519 Likes on 357 Posts

Default

Originally Posted by redvetracr
a steel spring has worked quite well for me...
I don't care about period correct so steel / composite etc doesn't matter, just looking for fastest lap times.
I lost the period correct when I installed a 6 speed , Rack & pinion steering and more etc...

Last edited by cagotzmann; 07-06-2018 at 07:50 PM.
Old 07-06-2018, 07:52 PM
  #22  
cagotzmann
Melting Slicks
Thread Starter
 
cagotzmann's Avatar
 
Member Since: Jun 2011
Posts: 2,960
Received 519 Likes on 357 Posts

Default

Originally Posted by GTR1999
We never run glass springs. We used Tom's steel springs, made by Deaver in CA. We had one made for this car to solve the squatting issue they have. I may still have the build spec's but I would have to go through the build file. This is real 1480 12 bolt with Tom complete IRS setup, no smoke and mirrors, no cut corners inside, takes the abuse.


Drag racing or road course ?. I am setup for road course driving.



Quick Reply: Need a stiffer rear spring.



All times are GMT -4. The time now is 08:32 PM.