Looking for original dump Delco 5337 ARZ 1983 C3 injection model
04-26-2019, 07:51 AM
#1
Looking for original dump Delco 5337 ARZ 1983 C3 injection model
Hello friends,
I try a repair to 1982 C3 V8 5.7L injection module.
Module 16025211
service# 1225550
Engine won't start , cranking OK.
Check a module and eprom...Then found a burned eprom.
Try a backup with ROM writer,
But also no response.
I looking for original eprom dump.
Please someone have it?
Write on the ROM Delco 5337 ARZ
I hope your help.
Best regards,
I try a repair to 1982 C3 V8 5.7L injection module.
Module 16025211
service# 1225550
Engine won't start , cranking OK.
Check a module and eprom...Then found a burned eprom.
Try a backup with ROM writer,
But also no response.
I looking for original eprom dump.
Please someone have it?
Write on the ROM Delco 5337 ARZ
I hope your help.
Best regards,
04-26-2019, 01:53 PM
#2
Have you seen this? https://corvettesalvage.com/product/...ice-1982-1985/
Hello friends,
I try a repair to 1982 C3 V8 5.7L injection module.
Module 16025211
service# 1225550
Engine won't start , cranking OK.
Check a module and eprom...Then found a burned eprom.
Try a backup with ROM writer,
But also no response.
I looking for original eprom dump.
Please someone have it?
Write on the ROM Delco 5337 ARZ
I hope your help.
Best regards,
I try a repair to 1982 C3 V8 5.7L injection module.
Module 16025211
service# 1225550
Engine won't start , cranking OK.
Check a module and eprom...Then found a burned eprom.
Try a backup with ROM writer,
But also no response.
I looking for original eprom dump.
Please someone have it?
Write on the ROM Delco 5337 ARZ
I hope your help.
Best regards,
The following users liked this post:
taisuke-san (04-26-2019)
04-26-2019, 02:16 PM
#3
Or look here... you might be able to swap to an 84 ECM that may be more readily available and work better:
https://www.corvetteactioncenter.com...1226430-a.html
https://www.corvetteactioncenter.com...1226430-a.html
04-27-2019, 07:17 AM
#5
Race Director
try this guy.: tbichips.com more of a standard tbi guy, but he has been programming eproms for these boxes for over a decade.