how big is your cam lift in your 350
#1
Racer
Thread Starter
Member Since: Jan 2002
Location: central square NY
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
how big is your cam lift in your 350
just a question i have for all of you, i want to see how my lift spec's compare to the rest of you. please put in intake and exhaust and why you choose that lift. :chevy
#2
Team Owner
Re: how big is your cam lift in your 350 (gravismaximus)
Well - mine is a 383 (350 block) and my lift is .540
:cheers:
Olivier
:cheers:
Olivier
#10
Race Director
Member Since: Mar 2001
Location: Living in the Hartland
Posts: 11,322
Likes: 0
Received 1 Like
on
1 Post
Re: how big is your cam lift in your 350 (gravismaximus)
0.546 and .563 with 1.6 rockers, need to switch to 1.5 to get to .509 and .528, too much lift for my little 350 right now.
#11
Moderator
Re: how big is your cam lift in your 350 (gravismaximus)
Went from 510/510 to 487/490 to 465/485 in the last two years. Looking for more torque in the 1800-5800 range. But it's not always lift, there's lotsa variables within each cam that change it charactarstics.
#15
Le Mans Master
Re: how big is your cam lift in your 350 (gravismaximus)
I believe my single-pattern Crane Energizer 272H is rated at .450/.450" lift before multiplication by the rocker ratio.
#16
Racer
Thread Starter
Member Since: Jan 2002
Location: central square NY
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Re: how big is your cam lift in your 350 (TedH)
so mines right in the middle, good. i got a .525 .525 roller comp cam thanks for letting me now. :steering:
#18
Race Director
Member Since: Aug 1999
Location: Toronto
Posts: 10,073
Likes: 0
Received 0 Likes
on
0 Posts
Re: how big is your cam lift in your 350 (SLICKMAN)
Had .454/.488 then switched to .447/.447 for more mid-range in my mild buildup. Cost about 20hp but brought the rest of it down into a more usable range.
#19
Le Mans Master
Re: how big is your cam lift in your 350 (SuperFast80)
Currently .488 & .510 hyd, future 388 may have around .650 mech roller :D