C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Rear wheels

Thread Tools
 
Search this Thread
 
Old 02-22-2003, 11:02 AM
  #1  
hauk
Instructor
Thread Starter
 
hauk's Avatar
 
Member Since: Feb 2003
Location: jacksonville florida
Posts: 176
Likes: 0
Received 0 Likes on 0 Posts
Default Rear wheels

The rear wheels on my 73 coupe are not straight up and down,They lean in at the top,Is this caused by a weak spring or something else?
Old 02-22-2003, 11:04 AM
  #2  
SanDiegoPaul
Race Director
Support Corvetteforum!
 
SanDiegoPaul's Avatar
 
Member Since: Sep 2002
Location: San Diego - Deep Within The State of CONFUSION!
Posts: 10,362
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Rear wheels (hauk)

That is negative camber. There should be certain amount of it, in the rear anyway but not much. Yes I'd have the rear checked out for worn bushings and such. Also bearings can cause that but by the time the bearing was that loose, I think you would be hearing it.



Quick Reply: Rear wheels



All times are GMT -4. The time now is 04:25 PM.