Centerforce DF clutch?
Thread Starter
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Centerforce DF clutch?
Is this the correct one? #DF735552, 11x1 1/8x 10.
http://store.summitracing.com/partde...57#largerimage
http://store.summitracing.com/partde...57#largerimage
Safety Car
Joined: Aug 2001
Posts: 3,892
Likes: 13
From: Pettis Performance 565 with two stages of Nitrous Supply nitrous 1.082, 4.61 at 155, 7.17 at 192
Re: Centerforce DF clutch? (1970 Stingray)
Len, What kind of tranny are you using, what is the spline count on your tranny?
If the spline count is right, I believe that is the right one, check to be sure though.
If the spline count is right, I believe that is the right one, check to be sure though.
Thread Starter
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Re: Centerforce DF clutch? (69 N.O.X. RATT)
Thanks John, I'm using a rebuilt M-22 with a 10-spline shaft. I wasn't sure about the diameter either.
On another topic John, you're using the Lakewood scattershield aren't you? I think I remmber you posting about aligning it to the block?? :confused: Did you use their block locator kit?
Thanks
On another topic John, you're using the Lakewood scattershield aren't you? I think I remmber you posting about aligning it to the block?? :confused: Did you use their block locator kit?
Thanks
Melting Slicks
Joined: Jun 2001
Posts: 3,281
Likes: 6
From: NC USA
Re: Centerforce DF clutch? (1970 Stingray)
Len - There is a good article in the current CHP that details checking runout on a Lakewood scattersheild. They do recommend the kit and to replace the dowel pins with their longer ones since the 2-piece scattersheild is thicker than the stock bellhousing. I'm doing mine now for my new tranny install. :smash:
Thread Starter
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Re: Centerforce DF clutch? (Marks69BB)
Thanks Mark, I saw that article. They've had some very timely articles for me recently. I'm glad I subscribed. :D
Drifting
Joined: Sep 2000
Posts: 1,355
Likes: 0
From: Germantown Maryland
Re: Centerforce DF clutch? (1970 Stingray)
Thats the one I just put in... but an M-22 10 spline :skep: I thought they were 22 ? Use the CF TO and measure the distance to tip of Adjustable Ball stud. This is critical in the geometry. Also you will need a longer clutch fork Rod. I got 1.5" longer one Off C-2 I think...
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Re: Centerforce DF clutch? (Gordonm)
I just went down to the gargage to check the splines....it's a 10.
Melting Slicks
Joined: Jun 2001
Posts: 3,281
Likes: 6
From: NC USA
Re: Centerforce DF clutch? (1970 Stingray)
Len - Since I had to buy a new clutch disc to fit my new Tremec's 26 spline input shaft, I have no use for the current 6 month old 10 spline CF DF clutch disc. If you're interested in saving some money by just buying the pressure plate new, email me and we can work a deal.
[Modified by Marks69BB, 9:45 PM 7/17/2003]
[Modified by Marks69BB, 9:45 PM 7/17/2003]
Thread Starter
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Re: Centerforce DF clutch? (Marks69BB)
Thanks Mark, I'll keep that in mind but will probably go with new since everything else on this rebuild is brand new or recently rebuilt.
Drifting
Joined: Jan 2000
Posts: 1,612
Likes: 0
From: Phoenix Arizona
Re: Centerforce DF clutch? (1970 Stingray)
Len- I have this also. Good choice. Not a hard pedal at all!!!! No problem on my end as far as adjustment goes......
How is the motor coming along??
Bob :cheers:
How is the motor coming along??
Bob :cheers:
Safety Car
Joined: Dec 1999
Posts: 4,148
Likes: 5
From: Roxbury NJ
Re: Centerforce DF clutch? (Marks69BB)
Len - Since I had to buy a new clutch disc to fit my new Tremec's 26 spline input shaft, I have no use for the current 6 month old 10 spline CF DF clutch disc. If you're interested in saving some money by just buying the pressure plate new, email me and we can work a deal.
[Modified by Marks69BB, 9:45 PM 7/17/2003]
[Modified by Marks69BB, 9:45 PM 7/17/2003]
Melting Slicks
Joined: Jun 2001
Posts: 3,281
Likes: 6
From: NC USA
Re: Centerforce DF clutch? (Flareside)
Mark, did you try this yet? A friend of mine needed a new disc for his DF, and Centerforce wouldn't sell it to him. They only sell the clutch as a matched set. He was pissed! :lol:
Safety Car
Joined: Dec 1999
Posts: 4,148
Likes: 5
From: Roxbury NJ
Re: Centerforce DF clutch? (Marks69BB)
Mark, did you try this yet? A friend of mine needed a new disc for his DF, and Centerforce wouldn't sell it to him. They only sell the clutch as a matched set. He was pissed! :lol:
Joe - If your friend can use my 10 spline disc and is interested, let me know. I bought a new clutch disc from Keisler.
Can't wait to hear how your TKO install goes, I have one on order myself.
