Are you ready to start the yearly Christmas Free thread?
#1
Le Mans Master
Thread Starter
Member Since: Sep 2000
Location: DFW TX
Posts: 9,078
Likes: 0
Received 7 Likes
on
4 Posts
Cruise-In VII Veteran
St. Jude Donor '07
Are you ready to start the yearly Christmas Free thread?
MAKE SURE YOU GUYS EDIT YOUR THREADS ONCE THE STUFF IS GONE!
I've got a few things that need a good home. In the past we have run it like this.
Items are free to a needed home. No turning around and selling it on ebay.
Giver pays the shipping.
You can only except one item during the whole event.
No "thank you's" are necessary.
Respond to the thread, not IM. Giver will IM for addy.
Here are my items up for grabs to a good home.
5200 MSD pill (Found new home)
New control arm bolts (Found new home)
New spring bolts(Not sure of the year or size). (Found new home)
Happy Holidays
Buddy
I've got a few things that need a good home. In the past we have run it like this.
Items are free to a needed home. No turning around and selling it on ebay.
Giver pays the shipping.
You can only except one item during the whole event.
No "thank you's" are necessary.
Respond to the thread, not IM. Giver will IM for addy.
Here are my items up for grabs to a good home.
5200 MSD pill (Found new home)
New control arm bolts (Found new home)
New spring bolts(Not sure of the year or size). (Found new home)
Happy Holidays
Buddy
Last edited by ddecart; 12-02-2004 at 08:10 PM.
#4
Melting Slicks
Originally Posted by Budman78
New control arm bolts
New spring bolts(Not sure of the year or size).
Happy Holidays
Buddy
New spring bolts(Not sure of the year or size).
Happy Holidays
Buddy
Steve
#5
Team Owner
Member Since: Jun 2004
Location: Smile, it's just the internet.
Posts: 20,216
Likes: 0
Received 4 Likes
on
2 Posts
I've got a new-in-box, never-used-or-installed Crane HI-6 unit and Crane LX-91 HVC coil. The coil states that it is for use with 4-bangers, but I don't see why it wouldn't work with V8. I ordered the LX-91 on accident and the HI-6 was ordered before I realized MSD had the Digital-6... I've only had them for a couple months...
I also have a new, sealed set of Summit stainless intake bolts for a BBC. When I ordered them, I thought they had 12 point heads...they're normal hex.
You can NOT have my original air-cleaner wing nut, though!
Merry Christmas!
HI-6 and coil went to Twin Turbo
L71Maynard got the ES tranny mount
I also have a new, sealed set of Summit stainless intake bolts for a BBC. When I ordered them, I thought they had 12 point heads...they're normal hex.
You can NOT have my original air-cleaner wing nut, though!
Merry Christmas!
HI-6 and coil went to Twin Turbo
L71Maynard got the ES tranny mount
Last edited by CGGorman; 12-08-2004 at 02:21 PM.
#6
is that hi6 free??? If so, I got 1st dibs
I've got some stuff also but I'll have to inventorize (sp?) it since I'm not sure what I still have and what not.
I do have a moroso oil pump pickup for a BBC pump, it's one of those gold colored things.
I've got some stuff also but I'll have to inventorize (sp?) it since I'm not sure what I still have and what not.
I do have a moroso oil pump pickup for a BBC pump, it's one of those gold colored things.
#8
Drifting
Member Since: Sep 1999
Location: Wylie TX
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
I'll be second in line on the Hi-6 box & coil if TT decides he doesn't want it for whatever reason.
I'll look through my old stuff tonight to see what I have to offer.
I'll look through my old stuff tonight to see what I have to offer.
Last edited by BeaterShark; 11-30-2004 at 03:43 PM.
#13
Drifting
Member Since: Sep 1999
Location: Wylie TX
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I remember for sure that I have two gauges (from a '74, I think) that are left over from an entire center console I bought off of ebay. I ran them a while and they worked fine but have since replaced them with VDO gauges. I'd like for each to go to a different person.
Fuel Gauge (Claimed)
Ammeter (Claimed)
Fuel Gauge (Claimed)
Ammeter (Claimed)
Last edited by BeaterShark; 12-06-2004 at 12:54 PM.
#14
Originally Posted by BeaterShark
Ok, I remember for sure that I have two gauges (from a '74, I think) that are left over from an entire center console I bought off of ebay. I ran them a while and they worked fine but have since replaced them with VDO gauges. I'd like for each to go to a different person.
Fuel Gauge
Ammeter
Fuel Gauge
Ammeter
#15
Originally Posted by COMMANDER370
TWIN TURBO,
I was just avoiding the Christmas rush with your fittings
I was just avoiding the Christmas rush with your fittings
#16
Senior Member since 1492
*****Gone to a good BB, I forget who got these! *******
I got a few items too:
454 Federal Mogul Rod bearings, std. $6.69 ea at Summit, I got a complete set of 8. NIB. http://store.summitracing.com/defaul...tt=fem-3190-cp
Also a set of main crank bearings STD size, Federal Mogul # 4400-M, which I now find is replaced by # 4400-MA. $30 at Summit.
I bought the above in error, my crank is 0.010. The main bearings I did fit to the block and so in that sense they have been out of the box. The rod bearings are still in the box and are plastic wrapped. http://store.summitracing.com/defaul...00-m&x=13&y=10
I got a few items too:
454 Federal Mogul Rod bearings, std. $6.69 ea at Summit, I got a complete set of 8. NIB. http://store.summitracing.com/defaul...tt=fem-3190-cp
Also a set of main crank bearings STD size, Federal Mogul # 4400-M, which I now find is replaced by # 4400-MA. $30 at Summit.
I bought the above in error, my crank is 0.010. The main bearings I did fit to the block and so in that sense they have been out of the box. The rod bearings are still in the box and are plastic wrapped. http://store.summitracing.com/defaul...00-m&x=13&y=10
Last edited by Jughead; 12-17-2004 at 06:23 AM.
#17
Le Mans Master
Thread Starter
Member Since: Sep 2000
Location: DFW TX
Posts: 9,078
Likes: 0
Received 7 Likes
on
4 Posts
Cruise-In VII Veteran
St. Jude Donor '07
Jughead - You missed the point. You have to pay the shipping. It's a gift...If they offer to pay the shipping that's different.
Merry Christmas, Budman
Merry Christmas, Budman
#18
Senior Member since 1492
Originally Posted by Budman78
Jughead - You missed the point. You have to pay the shipping. It's a gift...If they offer to pay the shipping that's different.
Merry Christmas, Budman
Merry Christmas, Budman
Oh, ok then no shipping. Fixed! :o
Last edited by Jughead; 11-30-2004 at 05:24 PM.