1968 Resto Mod Rag Top
#41
Le Mans Master
Thread Starter
really not interested in swapping out the front clip
if someone wants to buy the car and do it so be it
it makes the car unique
I'm not going to give this one away, it's got a beautiful frame, bird cage, and runs great.
if someone wants to buy the car and do it so be it
it makes the car unique
I'm not going to give this one away, it's got a beautiful frame, bird cage, and runs great.
#42
Race Director
Member Since: Mar 2003
Location: Eustis ( Area 51 Bat Cave ) Fl
Posts: 11,608
Received 771 Likes
on
644 Posts
My other post in your thread wasnt suggesting you swap but from others replies i got the impression some do not like the flip clip as we do so i was giving them an option,
Last edited by The13Bats; 09-24-2017 at 09:07 PM.
#43
Le Mans Master
Thread Starter
saves weight, eliminates complexity, and gives the front end a smooth clean look.
#46
Le Mans Master
Thread Starter
all the white stripes are plasti dip
stock 350 with chevy high rise and holley 600
runs great!
I also have a 496 BB chevy ready to go in if interested
stock 350 with chevy high rise and holley 600
runs great!
I also have a 496 BB chevy ready to go in if interested
#47
Le Mans Master
Thread Starter
still some very nice fall weather,
winter price 9500 cash.
if it doesn't sell, engine is getting upgraded and the madness begins!
winter price 9500 cash.
if it doesn't sell, engine is getting upgraded and the madness begins!
#48
Le Mans Master
Thread Starter
#49
Le Mans Master
Thread Starter
up top
now that the temps are dropping the car is nearing a bb conversion
if you want it, now is the time to buy at this price
out of work again and too many projects / toys
this one is an EZ project as much of the sweat equity is already there
now that the temps are dropping the car is nearing a bb conversion
if you want it, now is the time to buy at this price
out of work again and too many projects / toys
this one is an EZ project as much of the sweat equity is already there
#50
Chevrolet Corvette
#51
Le Mans Master
Thread Starter
Need to move this one out.
If you are interested in a cool looking 68 vette that fires up everytime and drives nice for a good price this may be the car for you
needs:
interior work and gauges gas gauge broke, speedo and tach (has a sun tach on column that works) oil pressure, clock, and temp gauge good
seats are good but carpet is worn, needs door panels, dash good
exterior the strips are "plastidip" and there is a small ding on the flip front end that was fixed OK, *bumper bent in and cracked glass* car has presentable paint with chips and cracks in spots, but overall body is solid
very nice frame, birdcage, fresh bushings, brakes, car is a driver
OK, NO BS 9500 going back on ebay with a 10500 reserve
I need to move this car. I also have some pretty outrageous power plants if you want to go fast 496 BB crate engine, OBX side pipes, 480LE 4 spd auto, and some nice dress up parts
This engine spanks out 569 HP and 540 trq mild hyd 540 lift cam, roller rockers, 2 bolt main, scat 4.25 crank and rods, forged pistons, alum square port heads, polished intake, holley 850 DP, alum water pump, pulleys, brackets, new fuel pump. everything needed to install.
6k FOR THIS STUFF!
option 2
Twin Turbo Iron block 4.8 LS chevy. garrett t60 turbos (no junk), same 480le tranny. fresh 3.82 short block, gen 4 rods, sps bolts, 3.82 (.040 over), wiseco forged pistons, 9.5 CR, head studs. Garret t60 turbos, 80 lb injectors, LPE tuned ecm, custom manifolds for c3, front mount intercooler, 799 corvette heads,
I have this short block on the stand, and parts to assemble a complete twin turbo engine. I bought this from a racer who ran 9.20s in a c2 so this WILL be a mover. The engine is capable of over 800 hp, will need the tranny beefed to handle that much, as well as the rear, but you WILL see the world through a screaming face, I have a tt z06 so ask me how I know.
I need 6K for this stuff too. see if you can build 800 hp any cheaper than that!!
bottom line. life happens, need to sell some of this stuff off.
PM me if interested.
If you are interested in a cool looking 68 vette that fires up everytime and drives nice for a good price this may be the car for you
needs:
interior work and gauges gas gauge broke, speedo and tach (has a sun tach on column that works) oil pressure, clock, and temp gauge good
seats are good but carpet is worn, needs door panels, dash good
exterior the strips are "plastidip" and there is a small ding on the flip front end that was fixed OK, *bumper bent in and cracked glass* car has presentable paint with chips and cracks in spots, but overall body is solid
very nice frame, birdcage, fresh bushings, brakes, car is a driver
OK, NO BS 9500 going back on ebay with a 10500 reserve
I need to move this car. I also have some pretty outrageous power plants if you want to go fast 496 BB crate engine, OBX side pipes, 480LE 4 spd auto, and some nice dress up parts
This engine spanks out 569 HP and 540 trq mild hyd 540 lift cam, roller rockers, 2 bolt main, scat 4.25 crank and rods, forged pistons, alum square port heads, polished intake, holley 850 DP, alum water pump, pulleys, brackets, new fuel pump. everything needed to install.
6k FOR THIS STUFF!
option 2
Twin Turbo Iron block 4.8 LS chevy. garrett t60 turbos (no junk), same 480le tranny. fresh 3.82 short block, gen 4 rods, sps bolts, 3.82 (.040 over), wiseco forged pistons, 9.5 CR, head studs. Garret t60 turbos, 80 lb injectors, LPE tuned ecm, custom manifolds for c3, front mount intercooler, 799 corvette heads,
I have this short block on the stand, and parts to assemble a complete twin turbo engine. I bought this from a racer who ran 9.20s in a c2 so this WILL be a mover. The engine is capable of over 800 hp, will need the tranny beefed to handle that much, as well as the rear, but you WILL see the world through a screaming face, I have a tt z06 so ask me how I know.
I need 6K for this stuff too. see if you can build 800 hp any cheaper than that!!
bottom line. life happens, need to sell some of this stuff off.
PM me if interested.
Last edited by Rkreigh; 01-19-2018 at 07:00 AM.
#52
Le Mans Master
Thread Starter
#53
Le Mans Master
Thread Starter
spring bump my house is going to close march 9th
after that, I will drive it until it sells
please don't talk about less than 9500, this vette is too much fun and drives like a dream
If i didn't have 2 other vettes this one would be staying with me.
And if it doesn't sell, I'll be driving it to carlisle and give it a go after some more mods
the TT 4.8 and 480LE are waiting for me to drop em in with a few $$ to get er dun.
after that, I will drive it until it sells
please don't talk about less than 9500, this vette is too much fun and drives like a dream
If i didn't have 2 other vettes this one would be staying with me.
And if it doesn't sell, I'll be driving it to carlisle and give it a go after some more mods
the TT 4.8 and 480LE are waiting for me to drop em in with a few $$ to get er dun.
#54
Le Mans Master
Thread Starter
#57
Le Mans Master
Thread Starter
pics are right in this thread.
I promised to send you pics, but the car is getting work done on it and gettinga new distributor and tune up for spring (new plugs, wires, distr, ect...)
there is MUCH sweat equity in this car. good luck on your search. You won't find a nice driver in this condition for less $
there are picture collectors, and buyers, call me if serious, I sent you my phone number, another gent wants the car, and he DOES look serious, so if you are truly interested, please contact me.
Thanks for the free bump, someone will get a head turning driver at a hyndai price.
I'll also bump up the pics of my twin turbo engine (4.8 LS)
that's why I bought this car, and now that my house sold, it might just happen now that spring is here.
I promised to send you pics, but the car is getting work done on it and gettinga new distributor and tune up for spring (new plugs, wires, distr, ect...)
there is MUCH sweat equity in this car. good luck on your search. You won't find a nice driver in this condition for less $
there are picture collectors, and buyers, call me if serious, I sent you my phone number, another gent wants the car, and he DOES look serious, so if you are truly interested, please contact me.
Thanks for the free bump, someone will get a head turning driver at a hyndai price.
I'll also bump up the pics of my twin turbo engine (4.8 LS)
that's why I bought this car, and now that my house sold, it might just happen now that spring is here.
#59
Le Mans Master
Thread Starter
in the c5 section, I emailed you some pics turbo engine is ready to bolt together and fly
I should put this engine in this vette and paint it and it will soar in value.
also have a 480LE trans that needs to be behind this engine
https://www.corvetteforum.com/forums...post1597102126
I should put this engine in this vette and paint it and it will soar in value.
also have a 480LE trans that needs to be behind this engine
https://www.corvetteforum.com/forums...post1597102126
Last edited by Rkreigh; 04-30-2018 at 05:56 AM.