FS: 1973 Convertible - project
#1
Le Mans Master
Thread Starter
SOLD ------ 1973 Convertible - project
numbers matching motor.
the car was taken off the road sometime in the late 80's early 90's by the previous owner.
currently I have a completed rolling chassis. everything on the chassis has either been replaced with new or rebuilt.
car was originally an automatic (I have the automatic that came with the car) I was switching it to a 4 speed.
Motor rebuilt
rebuilt Quadrajet carb
new stainless steel fuel lines and brake lines installed
new fuel tank
new fuel tank sending unit
trailing arms rebuilt by Vtech Corvette
Rear Differential rebuilt Vtech Corvette
Rebuilt BW Super T10 Transmission
rebuilt brake calipers
new rotors and pads
new front wheel bearings
new rally wheels
new tires
upgraded steering box with Power steering.
suspension rebuilt
body is off the frame and needs to be redone.
the body has a rusted rocker channel on the left side, and some rust on the windshield frame.
I have another rocker channel to put in, new upper corners for the windshield frame and a new lower center section for the windshield frame.
I have some of the interior pieces (seats, instrument cluster, passenger dash, console top, etc)
I have the convertible top along with a factory hard top, new radiator support, new AC condenser, as well as LOTS of other assorted parts for the car.
I lost interest in restoring the car and just want to sell it and make room for other projects.
$8000.00 or best offer.
the car was taken off the road sometime in the late 80's early 90's by the previous owner.
currently I have a completed rolling chassis. everything on the chassis has either been replaced with new or rebuilt.
car was originally an automatic (I have the automatic that came with the car) I was switching it to a 4 speed.
Motor rebuilt
rebuilt Quadrajet carb
new stainless steel fuel lines and brake lines installed
new fuel tank
new fuel tank sending unit
trailing arms rebuilt by Vtech Corvette
Rear Differential rebuilt Vtech Corvette
Rebuilt BW Super T10 Transmission
rebuilt brake calipers
new rotors and pads
new front wheel bearings
new rally wheels
new tires
upgraded steering box with Power steering.
suspension rebuilt
body is off the frame and needs to be redone.
the body has a rusted rocker channel on the left side, and some rust on the windshield frame.
I have another rocker channel to put in, new upper corners for the windshield frame and a new lower center section for the windshield frame.
I have some of the interior pieces (seats, instrument cluster, passenger dash, console top, etc)
I have the convertible top along with a factory hard top, new radiator support, new AC condenser, as well as LOTS of other assorted parts for the car.
I lost interest in restoring the car and just want to sell it and make room for other projects.
$8000.00 or best offer.
Last edited by RPOZ4Z; 03-16-2018 at 05:57 PM.
#3
1973 corvette
numbers matching motor.
the car was taken off the road sometime in the late 80's early 90's by the previous owner.
currently I have a completed rolling chassis. everything on the chassis has either been replaced with new or rebuilt.
car was originally an automatic (I have the automatic that came with the car) I was switching it to a 4 speed.
Motor rebuilt
rebuilt Quadrajet carb
new stainless steel fuel lines and brake lines installed
new fuel tank
new fuel tank sending unit
trailing arms rebuilt by Vtech Corvette
Rear Differential rebuilt Vtech Corvette
Rebuilt BW Super T10 Transmission
rebuilt brake calipers
new rotors and pads
new front wheel bearings
new rally wheels
new tires
upgraded steering box with Power steering.
suspension rebuilt
body is off the frame and needs to be redone.
the body has a rusted rocker channel on the left side, and some rust on the windshield frame.
I have another rocker channel to put in, new upper corners for the windshield frame and a new lower center section for the windshield frame.
I have some of the interior pieces (seats, instrument cluster, passenger dash, console top, etc)
I have the convertible top along with a factory hard top, new radiator support, new AC condenser, as well as LOTS of other assorted parts for the car.
I lost interest in restoring the car and just want to sell it and make room for other projects.
$8000.00 or best offer.
the car was taken off the road sometime in the late 80's early 90's by the previous owner.
currently I have a completed rolling chassis. everything on the chassis has either been replaced with new or rebuilt.
car was originally an automatic (I have the automatic that came with the car) I was switching it to a 4 speed.
Motor rebuilt
rebuilt Quadrajet carb
new stainless steel fuel lines and brake lines installed
new fuel tank
new fuel tank sending unit
trailing arms rebuilt by Vtech Corvette
Rear Differential rebuilt Vtech Corvette
Rebuilt BW Super T10 Transmission
rebuilt brake calipers
new rotors and pads
new front wheel bearings
new rally wheels
new tires
upgraded steering box with Power steering.
suspension rebuilt
body is off the frame and needs to be redone.
the body has a rusted rocker channel on the left side, and some rust on the windshield frame.
I have another rocker channel to put in, new upper corners for the windshield frame and a new lower center section for the windshield frame.
I have some of the interior pieces (seats, instrument cluster, passenger dash, console top, etc)
I have the convertible top along with a factory hard top, new radiator support, new AC condenser, as well as LOTS of other assorted parts for the car.
I lost interest in restoring the car and just want to sell it and make room for other projects.
$8000.00 or best offer.
The following users liked this post:
Deron (08-11-2023)
#6
Le Mans Master
Thread Starter
parts that I don't have are the rest of the interior (carpet, top dash pad, console, console armrest), windshield, mufflers (I have the rest of the exhaust), radiator, power steering pump, starter, AC compressor (have the old ones for cores) misc other small stuff to finish the car..
I'm sure I may have left out some things but that's the big stuff.
I'm sure I may have left out some things but that's the big stuff.
The following users liked this post:
mikep3 (01-31-2018)
#9
Melting Slicks
Member Since: Mar 2003
Location: Indianapolis IN
Posts: 3,472
Received 444 Likes
on
322 Posts
Finalist 2020 C4 of the Year - Unmodified
C4 of Year Finalist (stock) 2019
Man...I would LOVE to snap this up and pick up on this project where you left off. My problem is that transport from NJ to Indy would be major logistical nightmare. Damn....
I've even still got all of my 1973 books, manuals and notes from the last '73 I restored...this would be a GREAT car to finish, you've done outstanding work up to this point!!
GLWS!!
Regards,
Dave
I've even still got all of my 1973 books, manuals and notes from the last '73 I restored...this would be a GREAT car to finish, you've done outstanding work up to this point!!
GLWS!!
Regards,
Dave
#10
Le Mans Master
Thread Starter
Man...I would LOVE to snap this up and pick up on this project where you left off. My problem is that transport from NJ to Indy would be major logistical nightmare. Damn....
I've even still got all of my 1973 books, manuals and notes from the last '73 I restored...this would be a GREAT car to finish, you've done outstanding work up to this point!!
GLWS!!
Regards,
Dave
I've even still got all of my 1973 books, manuals and notes from the last '73 I restored...this would be a GREAT car to finish, you've done outstanding work up to this point!!
GLWS!!
Regards,
Dave
#13
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,361
Received 5,320 Likes
on
2,769 Posts
The following users liked this post:
Deron (08-14-2023)