How to adjust CompCams magnum rockers??
#1
Drifting
Thread Starter
Member Since: Aug 2000
Location: West Islip New York
Posts: 1,521
Likes: 0
Received 0 Likes
on
0 Posts
How to adjust CompCams magnum rockers??
When I installed and adjusted these rockers (model 1417 for centerbolt valve covers) when the engine was out, I noticed how tight the socket fit in the narrow bodies.
Now that the engine is in the car, theres no way to adjust these rockers with the engine running without binding them. I even tried a very narrow body 14mm socket and could not get it in the rocker bodies safely with the engine running.
My valve train is a little noisey and I know the valves need to adjusted, but how. I'm getting ready to chuck these peices of s**t, so any help would be appreciated.
Now that the engine is in the car, theres no way to adjust these rockers with the engine running without binding them. I even tried a very narrow body 14mm socket and could not get it in the rocker bodies safely with the engine running.
My valve train is a little noisey and I know the valves need to adjusted, but how. I'm getting ready to chuck these peices of s**t, so any help would be appreciated.