logo dimensions for the DIY... if anyone is interested
#1
Pro
Thread Starter
Member Since: Apr 2006
Location: Perth Western Australia
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
logo dimensions for the DIY... if anyone is interested
g'day,
a while back Agent86 was looking for a C4 logo.
ive been after one for a while too and decieded to get off my a$$ and get one.
i drew this logo on CAD and the shaded version was made by using the dimensions shown.
i know you guys measure things in feet/inches... but im not that smart so these dimensions are in millimetres... sorry.
dimension of logo should equal to about 5 inches from tip to tip. if you need a thicker border for the bowtie offset the line '1' inwards
a while back Agent86 was looking for a C4 logo.
ive been after one for a while too and decieded to get off my a$$ and get one.
i drew this logo on CAD and the shaded version was made by using the dimensions shown.
i know you guys measure things in feet/inches... but im not that smart so these dimensions are in millimetres... sorry.
dimension of logo should equal to about 5 inches from tip to tip. if you need a thicker border for the bowtie offset the line '1' inwards
#2
Safety Car
Member Since: Aug 2004
Location: Southwest Kansas
Posts: 4,767
Received 538 Likes
on
286 Posts
2022 Corvette of the Year Finalist -- Unmodified
2021 C6 of the Year Winner - Unmodified
Looks good, I just did one earlier this week for one of my students to cut one out on the CNC plasma cutter we got this year. I had to modify the design slightly so it would be "friendly" for the cutter. I'll post pictures when I get it done.
#3
Pro
Thread Starter
Member Since: Apr 2006
Location: Perth Western Australia
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
please post the pics
#6
Pro
Thread Starter
Member Since: Apr 2006
Location: Perth Western Australia
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts