Bread box delete on a 85??
#1
Instructor
Thread Starter
Member Since: Jul 2009
Location: Maimi ok
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Bread box delete on a 85??
I have seen several pictures of early c4's with out the "bread box" where is a good place to pick up the kit ? I hate that huge pad being in the way. Thanks for any help
#3
Pro
Member Since: Oct 2005
Location: Charlotte NC, behind someone going 10 under the speed limit
Posts: 721
Likes: 0
Received 1 Like
on
1 Post
Make your own. This is made from a 1/8 inch oak sheet from Lowes and covered in a piece of fender mat and painted/interior dyed SEM Landau Black. I did this about 2 years ago, doing fine still. I questioned doing this cause I'm all for originality but I like it a lot, glad I removed that stupid thing. Ive heard the kit is cheesy for what it costs.
Last edited by DarkBlue88; 04-06-2010 at 09:26 PM.
#5
Pro
Member Since: Aug 2007
Location: been there done that
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
Make your own. This is made from a 1/8 inch oak sheet from Lowes and covered in a piece of fender mat and painted/interior dyed SEM Landau Black. I did this about 2 years ago, doing fine still. I questioned doing this cause I'm all for originality but I like it a lot, glad I removed that stupid thing. Ive heard the kit is cheesy for what it costs.
very nice!may have to try that myself....
#7
Le Mans Master
Member Since: Jul 2009
Location: EOF ★ Kaliforniastan ★
Posts: 8,041
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '10
Make your own. This is made from a 1/8 inch oak sheet from Lowes and covered in a piece of fender mat and painted/interior dyed SEM Landau Black. I did this about 2 years ago, doing fine still. I questioned doing this cause I'm all for originality but I like it a lot, glad I removed that stupid thing. Ive heard the kit is cheesy for what it costs.
#8
Slingshot
Walnut Dash Panel 1984-1989 $85 shipped
I have a custom hand made furniture grade wood dash panel crafted from a single piece of American Black Walnut. The panel is solid wood and a full ½” thick to eliminate warping. It is finished with a high gloss, scratch resistant polyurethane coating. Includes installation hardware and A/C regulator insert and instructions - $85 shipped if you are interested.
(click photo to enlarge)
(click photo to enlarge)
#11
Instructor
Member Since: Sep 2009
Location: seabrook tx
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
I removed mine on my 86.Bought the kit. Its a real pain in the but to due.The kit says to cut the brackets with hack saw. I took it out in 1 piece.Have to take dash pad off.Bottom bolts suck.But I think it was worth it.
#12