Re-did my interior trim with hydrographics
#1
Burning Brakes
Thread Starter
Re-did my interior trim with hydrographics
I took advantage of the cold weather and re-did my interior trim pieces with a carbon fiber hydrographics treatment. Not too expensive, ... I think it came out pretty good and is a big difference over the original dulso stuff...
#3
Burning Brakes
Thread Starter
#6
Safety Car
Member Since: Mar 2005
Location: Fredonia WI
Posts: 3,566
Received 491 Likes
on
392 Posts
2023 C4 of the Year Finalist- Modified
Finalist 2020 C4 of the Year - Modified
C4 of Year Finalist (performance mods) 2019
2018 C4 of Year Finalist
Nice
How did you do the graphics? (eg, around the light switch)
How did you do the graphics? (eg, around the light switch)
#9
Team Owner
Member Since: May 2000
Location: Plantation Florida USAF(Retired) 1966-1990
Posts: 47,893
Received 4,504 Likes
on
3,589 Posts
U.S. Air Force
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
NCM Sinkhole Donor
Outstanding!
#11
Burning Brakes
Thread Starter
Thanks!
I picked up a spare set of trim so I could save my originals. So it was all OEM pieces , just not my own. I removed the dulso (or whatever the heck the name of that rubbery stuff is) and disassembled the parts before handing them over for the dip. I wanted to maintain the lighted graphics so I masked off the portions the best I could. The light switch graphics were maintained by using a circle just big enough to let them show. Since the original surface was black and I used the silver/black graphite look, it blended in well enough. I couldn't keep some of the graphics like the dimmer line or the power mirror graphcis on the door. I couldn't find a way to mask them and still have them look decent. I had hoped that maybe the hydrogrpahics might be thin enough to let the light shine through at night, but no dice. The fog light and traction control buttons were easy because they were recessed, so I just cut away the graphics up to the edge of the recessed area.
Cost was around $500 or so for it all (could've added the intrument cluster surround too), so compared to some of the pricing I was seeing at the other shops it was well worth it...
I picked up a spare set of trim so I could save my originals. So it was all OEM pieces , just not my own. I removed the dulso (or whatever the heck the name of that rubbery stuff is) and disassembled the parts before handing them over for the dip. I wanted to maintain the lighted graphics so I masked off the portions the best I could. The light switch graphics were maintained by using a circle just big enough to let them show. Since the original surface was black and I used the silver/black graphite look, it blended in well enough. I couldn't keep some of the graphics like the dimmer line or the power mirror graphcis on the door. I couldn't find a way to mask them and still have them look decent. I had hoped that maybe the hydrogrpahics might be thin enough to let the light shine through at night, but no dice. The fog light and traction control buttons were easy because they were recessed, so I just cut away the graphics up to the edge of the recessed area.
Cost was around $500 or so for it all (could've added the intrument cluster surround too), so compared to some of the pricing I was seeing at the other shops it was well worth it...
#12
Racer
Member Since: Oct 2010
Location: Providence RI
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Just went to YouTube and educated myself on this process..wow!...times are a changin'
very cool process and amazing production, see the videos, it's very impressive.
Best, Derek.
very cool process and amazing production, see the videos, it's very impressive.
Best, Derek.
Last edited by Docderek05; 02-04-2014 at 01:02 PM.