Memcal in the ECM control unit
#1
Memcal in the ECM control unit
I speak german and no english i have translated with google
I would like to secure for the future something and lay down difficult parts for me.
I bought an ECM ECU from a scrap dealer in the USA.
88 89 90 91 92 93 CUTLASS SUPREME ENGINE ECM ELECTRONIC CONTROL MODULE OEM
The ECM I cleaned and removed from my ECM the memcal AXCN and inserted into and into the cutlass supereme ECM.
Yesterday I destroyed some gasoline.
My vette ran as usual.
In the cutlass superme ECM a memcal AXKK was installed.
My question one can the AXKK somehow convert it as AXCN runs.
The eprom must be rewritten to me is already clear to me is the knock sensor board and the two ic which are designed for the emergency run.
The knock sensor board and the two ic are only tied to the one vehicle or can be because of what is fashionable.
On a reply I would ferret.
kleiner53
I would like to secure for the future something and lay down difficult parts for me.
I bought an ECM ECU from a scrap dealer in the USA.
88 89 90 91 92 93 CUTLASS SUPREME ENGINE ECM ELECTRONIC CONTROL MODULE OEM
The ECM I cleaned and removed from my ECM the memcal AXCN and inserted into and into the cutlass supereme ECM.
Yesterday I destroyed some gasoline.
My vette ran as usual.
In the cutlass superme ECM a memcal AXKK was installed.
My question one can the AXKK somehow convert it as AXCN runs.
The eprom must be rewritten to me is already clear to me is the knock sensor board and the two ic which are designed for the emergency run.
The knock sensor board and the two ic are only tied to the one vehicle or can be because of what is fashionable.
On a reply I would ferret.
kleiner53
#2
Race Director
Please post in one section only. Duplicate threads are confusing to both the original poster and the responders
I responded in the tech section and so did several other people.
I responded in the tech section and so did several other people.