Seat belt won't pull out.
#1
Racer
Thread Starter
Seat belt won't pull out.
I just bought a 90 ZR1 w/24k on it. Seat belt looks new but I can't get it to extract all the time. I moves an inch or 2 but stops like when you pull it too fast. I have been able to get it extracted a few times but mostly it is stuck.
Question: Is there any way to open one of these up to fix what it causing it to lock up? Anyone have an idea what is causing it to lock up?
Normally I would just buy a used one but being gray, most I have seen used are all dirty and stuff, mine has 24k on it.
Question: Is there any way to open one of these up to fix what it causing it to lock up? Anyone have an idea what is causing it to lock up?
Normally I would just buy a used one but being gray, most I have seen used are all dirty and stuff, mine has 24k on it.
#2
Melting Slicks
Member Since: Nov 2013
Location: Greater Cincinnati Area.
Posts: 3,451
Received 335 Likes
on
295 Posts
Mine did that. There was something inside I lubricated to make it work again.
A little bar I think? (I've slept since then.)
You may have to take the seat out to get the cover off of it. But yeah, it did the same thing and works perfect now.
I bet you can lubricate it and fix it.
Good Luck!
A little bar I think? (I've slept since then.)
You may have to take the seat out to get the cover off of it. But yeah, it did the same thing and works perfect now.
I bet you can lubricate it and fix it.
Good Luck!
Last edited by confab; 09-25-2017 at 04:13 PM.
#4
Melting Slicks
Member Since: Nov 2013
Location: Greater Cincinnati Area.
Posts: 3,451
Received 335 Likes
on
295 Posts
I remember I took the seat out. Took the cover off and it was fairly obvious.
I think there was a spring there. It's been over a year, but I think I just pulled on it and it was obvious.
It was the PS belt, so it probably didn't get as much use and it would come out a little ways and just lock up. And that fixed it.
I think there was a spring there. It's been over a year, but I think I just pulled on it and it was obvious.
It was the PS belt, so it probably didn't get as much use and it would come out a little ways and just lock up. And that fixed it.
#5
Burning Brakes