1994 6spd, what rear gear ratio?
#21
Safety Car
Originally Posted by steve9899
It only shows up in the online RPO lists for 89-90.
#22
Le Mans Master
Member Since: Jan 2004
Location: Why are there squished peanut butter cups in my underware?
Posts: 7,276
Likes: 0
Received 3 Likes
on
3 Posts
The C4 Cor-vette spec book by Antonick, does not list 3.54 in `92.
Just like `89, some early `92s 6-speeds received 3.54 rear axles.
My question remains to those who claim the ZR1s received 3.54s (excluding the `89 prototypes).
Just like `89, some early `92s 6-speeds received 3.54 rear axles.
My question remains to those who claim the ZR1s received 3.54s (excluding the `89 prototypes).
#23
Team Owner
Originally Posted by Z-07 freak
Not really,
Just curious where you got that from.
Just curious where you got that from.
when I checked a 91, it was a 3.45. However, someone corrected me by saying that the 3.54 was on the prototype, so I checked the source again, and lo-and-behold, the stock 90 had 3.45s!
Mike Antonick's book will not clear this up.
Go read my C4 RPO FAQ, there is an email exchange in there between Mike and myself. Trust me, the GM0 is about as clear as mud.
C4 RPO FAQ
#24
Le Mans Master
Member Since: Jan 2004
Location: Why are there squished peanut butter cups in my underware?
Posts: 7,276
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by bogus
The 1990 ZR1 was the only year with the 3.54 - they went to 3.45 in 1991. It could explain why the 1990 has been considered the quickest of the bunch.
This link, you posted earlier, is for an `89 prototype.
http://www.corvettearchive.com/image...ack_ZR1-p6.jpg
#25
Safety Car
Originally Posted by Z-07 freak
The C4 Cor-vette spec book by Antonick, does not list 3.54 in `92.
Just like `89, some early `92s 6-speeds received 3.54 rear axles.
Just like `89, some early `92s 6-speeds received 3.54 rear axles.