MrRenoman

A/O 7/6/20 I have one set left. See post #40 for more info.

The kit comes with hardware, including the extension studs, wingnuts, washers, 7mm screws, speed clips and instructions. The studs screw into your existing mounting screw boss. Minor drilling to expand the screw hole in the tail light mounting boss is needed to screw in the new extended studs. The kit is $50 including Priority shipping to the lower 48.

Are you tired of changing out your taillight bulbs scraping your skin trying to reach them from the bottom, through the license plate opening, or taillight openings repeating the dropping and picking up of the screws or your tools on the ground or into the frame void never to see them again? This kit not only flush mounts your taillights but you'll never need a 10mm socket or wrench again. The retaining ***** easily spin on and off.

Stop doing this.


Or this.


A very cool look



From any angle



This solves the problem of dropping screws and tools and makes changing out the bulbs so much easier. Probably doesn't help with arm scraping but makes the task easier. Plus you get the unique and cool look which begs the question..."How did you do that?"



You'll receive the extended studs, wingnuts, washers, 8 speed nuts and 8 7mm screws. The speedclips and screws hold the black plastic bracket to the urethane bumper. You don't really need to attach the black plastic bracket to the bumper but it does help when installing or removing the taillight housings. Taillights are not included.

Eric Macnak

Art I would like to purchase your last kit.....I like the look. What is the next step?

88vetteL98

I would like to buy a kit.

Payment sent 1-07-15 @1:19pm

MrRenoman

Thanks Eric, your kit is in the mail.

Art

MrRenoman

88vetteL98,
Payment received, item will be shipped tomorrow 1/8/16 USPS Priority.

Thank you,

Art

Eric Macnak

The package arrived. Thanks Art!

L98Justin

very cool!

whitemj1948

If you are going to put together some more kits I would be interested. Thank You Mike

L98Justin

same

MrRenoman

PM sent

slow-vette

I would be interested if you get more kits in stock.

MrRenoman

whitemj1948, L98Justin, and slow-vette. I'm putting them together. I'll get back to you soon. Weather has been hampering efforts.

Thanks,

MrRenoman

barbedwiredave

I would like a kit also if I'm not too late.

MrRenoman

Dave,
I had one left after the 3 previous requests. I'll let you know when I'll be ready to ship. I supply new U speed clips which I need to get Monday or Tuesday

Thanks,

MrRenoman

L98Justin

Thanks brother

whitemj1948

Thanks for the email. If you will send me your payment info I will pay you now and you can ship the kit when available. My address is: Michael White, 3018W 200S, Reynolds, Indiana 47980-8108. Thanks Mike

barbedwiredave

Thank you sir.

MrRenoman

PMs sent, ready to ship

Thanks,

MrRenoman

slow-vette

PM Sent. Thanks

L98Justin

payment sent brother