FS: Free Cold Start Valve 104 Oring
#1
Drifting
Thread Starter
Member Since: Nov 2015
Posts: 1,529
Received 230 Likes
on
189 Posts
Finalist 2020 C4 of the Year - Unmodified
Free Cold Start Valve 104 Oring
Those of us with an L98 fuel rail with cold start valve have a little problem. The oring, 104 in diagram, is an odd size and hard to find these days. Yet it holds our fuel.
I finally found a replacement from a big supplier, McMaster-Carr: https://www.mcmaster.com/#5267t71/=16w7jtt
#106 oring, fuel safe, ID: 3/16 OD: 3/8 Width: 3/32.
Note it's a 50 pack, had to have so I ordered. Yeah, I know I could delete the valve, but I live in Iowa, it gets cold here, whenever the nasty Mother Nature feels like it.
Obviously I have a few spares, so here's the deal: Forum members can have one, FREE. Wait, no, I'm no scammer, spammer, information seller or any of that junk. I'm just a '87 owner, happy to help anyone to prevent a leak of gas in a bad place.
So, here's the requirements and how to get one oring (only one, okay?):
1. Be a forum member.
2. Have an address in the United States serviced by the US Postal Service. Others get to pay me the postage, I'm not that rich.
3. Send me, kael, a PM requesting the oring and where to send.
That's it. You'll get an envelope from me with an oring. Done. Enjoy!
Here's the valve and oring pic to be clear, item 104 is what I've got:
I finally found a replacement from a big supplier, McMaster-Carr: https://www.mcmaster.com/#5267t71/=16w7jtt
#106 oring, fuel safe, ID: 3/16 OD: 3/8 Width: 3/32.
Note it's a 50 pack, had to have so I ordered. Yeah, I know I could delete the valve, but I live in Iowa, it gets cold here, whenever the nasty Mother Nature feels like it.
Obviously I have a few spares, so here's the deal: Forum members can have one, FREE. Wait, no, I'm no scammer, spammer, information seller or any of that junk. I'm just a '87 owner, happy to help anyone to prevent a leak of gas in a bad place.
So, here's the requirements and how to get one oring (only one, okay?):
1. Be a forum member.
2. Have an address in the United States serviced by the US Postal Service. Others get to pay me the postage, I'm not that rich.
3. Send me, kael, a PM requesting the oring and where to send.
That's it. You'll get an envelope from me with an oring. Done. Enjoy!
Here's the valve and oring pic to be clear, item 104 is what I've got:
Save
Save
Save
Save
Save
Save
Save
Save
Save
Save
Save
Save
Save
Last edited by kael; 03-24-2017 at 03:52 PM. Reason: Be clear, neh?
The following 3 users liked this post by kael:
#3
[QUOTE=kael;1594372409]Those of us with an L98 fuel rail with cold start valve have a little problem. The oring, 104 in diagram, is an odd size and hard to find these days. Yet it holds our fuel.
I finally found a replacement from a big supplier, McMaster-Carr: https://www.mcmaster.com/#5267t71/=16w7jtt
#106 oring, fuel safe, ID: 3/16 OD: 3/8 Width: 3/32.
Note it's a 50 pack, had to have so I ordered. Yeah, I know I could delete the valve, but I live in Iowa, it gets cold here, whenever the nasty Mother Nature feels like it.
Obviously I have a few spares, so here's the deal: Forum members can have one, FREE. Wait, no, I'm no scammer, spammer, information seller or any of that junk. I'm just a '87 owner, happy to help anyone to prevent a leak of gas in a bad place.
So, here's the requirements and how to get one (only one, okay?):
1. Be a forum member.
2. Have an address in the United States serviced by the US Postal Service. Others get to pay me the postage, I'm not that rich.
3. Send me, kael, a PM requesting the oring and where to send.
That's it. You'll get an envelope from me with an oring. Done. Enjoy!
Here's the valve and oring pic to be clear, item 104 is what I've got:
I finally found a replacement from a big supplier, McMaster-Carr: https://www.mcmaster.com/#5267t71/=16w7jtt
#106 oring, fuel safe, ID: 3/16 OD: 3/8 Width: 3/32.
Note it's a 50 pack, had to have so I ordered. Yeah, I know I could delete the valve, but I live in Iowa, it gets cold here, whenever the nasty Mother Nature feels like it.
Obviously I have a few spares, so here's the deal: Forum members can have one, FREE. Wait, no, I'm no scammer, spammer, information seller or any of that junk. I'm just a '87 owner, happy to help anyone to prevent a leak of gas in a bad place.
So, here's the requirements and how to get one (only one, okay?):
1. Be a forum member.
2. Have an address in the United States serviced by the US Postal Service. Others get to pay me the postage, I'm not that rich.
3. Send me, kael, a PM requesting the oring and where to send.
That's it. You'll get an envelope from me with an oring. Done. Enjoy!
Here's the valve and oring pic to be clear, item 104 is what I've got:
Save
Save
Save
Save
Save
Save
Save
Save
Save
Last edited by ceevettefly; 03-24-2017 at 04:33 PM.
The following users liked this post:
kael (10-06-2017)
The following users liked this post:
kael (10-06-2017)
#17
Drifting
Thread Starter
Member Since: Nov 2015
Posts: 1,529
Received 230 Likes
on
189 Posts
Finalist 2020 C4 of the Year - Unmodified
Since the Dawn of time They came, waiting silently through the centuries.
No one knew they could stop fuel, until now....
Of the 33 there can be only One!
Yeah, I am a huge fan on 'The Highlander'.
No one knew they could stop fuel, until now....
Of the 33 there can be only One!
Yeah, I am a huge fan on 'The Highlander'.
The following users liked this post:
kael (10-06-2017)