FS: '89 6 speed Part out of all non drive train parts
#81
Yes, the bread loaf. Let me know what you'd take for it with all mounting screws. I'm sure I need more parts but I'd like to lock down one of these. I just need to verify that my dash hasn't been mutilated. Had a crappy wood trim kit in it and aftermarket stereo stuff behind it that I will ultimately remove.
On that note I'm still interested in the Bose stuff, but it's lower priority on my to do list.
On that note I'm still interested in the Bose stuff, but it's lower priority on my to do list.
#82
Team Owner
I'm looking for the parking brake assembly. Need the cover too and all attaching bolts. Would you happen to have that ?? I think the assembly fits 88-96 cars but tot completely sure as yet.
#83
Team Owner
Pro Mechanic
Thread Starter
Yes, the bread loaf. Let me know what you'd take for it with all mounting screws. I'm sure I need more parts but I'd like to lock down one of these. I just need to verify that my dash hasn't been mutilated. Had a crappy wood trim kit in it and aftermarket stereo stuff behind it that I will ultimately remove.
On that note I'm still interested in the Bose stuff, but it's lower priority on my to do list.
On that note I'm still interested in the Bose stuff, but it's lower priority on my to do list.
Sorry, but I need to keep the parking brake intact in order to pass safety. I'd love to ditch the thing for weight and simplicity...but I have to keep it.
#84
Me neither, looks like 4 screws but I'm not sure how you access them. $50 + shipping is fine, let me just Check my dash tonight to verify nobody cut the mounting spots out for the stereo
#85
Melting Slicks
Member Since: Nov 2013
Location: Greater Cincinnati Area.
Posts: 3,451
Received 335 Likes
on
295 Posts
Hey Tom.. Thanks for the update.
How's the rear center trim under the hatch and the piece on the PS that connects to that and runs forward? The front of the hatch strut goes through it I think.
How's the rear center trim under the hatch and the piece on the PS that connects to that and runs forward? The front of the hatch strut goes through it I think.
#86
Team Owner
Pro Mechanic
Thread Starter
I already sold the rear center piece (the piece that the hatch latch goes through?), that's gone. The PS trim pieces I still have and they are in excellent condition.
This is the right, rear interior trim. The bottom piece is sort of the "track" for the roll-a-way shade and there is also a catch, intact, but I think that is for the left side. No cracks in any of it!
Trim pieces, $20 each
Catch, $5
Attachment 48102654
.
Last edited by Tom400CFI; 07-05-2017 at 04:24 PM.
#88
Melting Slicks
Member Since: Nov 2013
Location: Greater Cincinnati Area.
Posts: 3,451
Received 335 Likes
on
295 Posts
Sure thing.
I already sold the rear center piece (the piece that the hatch latch goes through?), that's gone. The PS trim pieces I still have and they are in excellent condition.
This is the right, rear interior trim. The bottom piece is sort of the "track" for the roll-a-way shade and there is also a catch, intact, but I think that is for the left side. No cracks in any of it!
Trim pieces, $20 each
Catch, $5
Attachment 48102654
.
I already sold the rear center piece (the piece that the hatch latch goes through?), that's gone. The PS trim pieces I still have and they are in excellent condition.
This is the right, rear interior trim. The bottom piece is sort of the "track" for the roll-a-way shade and there is also a catch, intact, but I think that is for the left side. No cracks in any of it!
Trim pieces, $20 each
Catch, $5
Attachment 48102654
.
#89
Team Owner
Pro Mechanic
Thread Starter
#90
Intermediate
Speedo/Tach
I had to move some items to another post in order to get all the pics uploaded.
Right rear 1/4 panel $200:
Attachment 48097122
Right door (everything works, no damage) $150:
Attachment 48097123
Left Door (damaged, glass broken): $25
Attachment 48097124
Right "gill" panel, $50:
Attachment 48097125
HVAC Components: heater box/core/evap, fan motor, AC compressor, Condenser...and note that the AC does work! $25 for each/any part, $50 for the compressor:
Attachment 48097126
Anything from the dash, or console; switches, C68, stereo, whatever...let's say, $15 per item, other than the C68 and Stereo, $25 each for those: SOLD: Right pwr seat switch and harness, Stereo, C68 head, radio bezel, gauge cluster and gauge cluster bezel
Attachment 48097127
Rear Hatch Glass, $50:
Attachment 48097128
Power seat tracks (yes, they work in all directions), $100 each SOLD, left pwr seat track Right still available.
Right front seat, no rips or tears or scuffs, but many wrinkles, $75:
Any light housing/assy, $10:
Right rear 1/4 panel $200:
Attachment 48097122
Right door (everything works, no damage) $150:
Attachment 48097123
Left Door (damaged, glass broken): $25
Attachment 48097124
Right "gill" panel, $50:
Attachment 48097125
HVAC Components: heater box/core/evap, fan motor, AC compressor, Condenser...and note that the AC does work! $25 for each/any part, $50 for the compressor:
Attachment 48097126
Anything from the dash, or console; switches, C68, stereo, whatever...let's say, $15 per item, other than the C68 and Stereo, $25 each for those: SOLD: Right pwr seat switch and harness, Stereo, C68 head, radio bezel, gauge cluster and gauge cluster bezel
Attachment 48097127
Rear Hatch Glass, $50:
Attachment 48097128
Power seat tracks (yes, they work in all directions), $100 each SOLD, left pwr seat track Right still available.
Right front seat, no rips or tears or scuffs, but many wrinkles, $75:
Any light housing/assy, $10:
#91
Team Owner
Pro Mechanic
Thread Starter
#94
Team Owner
Pro Mechanic
Thread Starter
I'll check.
The passenger's side seat track is still available. IDK if they're the same left/right or not...but the passenger's side, I have and it works as it should.
The passenger's side seat track is still available. IDK if they're the same left/right or not...but the passenger's side, I have and it works as it should.
The following users liked this post:
EA-vette (07-06-2017)
#95
Intermediate
The shipping question wasn't mine. That was confab
However, what do you want for the track and (now comes my shipping question) can you figure out the shipping to New Mexico 88012?
In following this thread I see you work with PayPal. Since I am new to the forum (as in joined today) do you prefer private messages for details...and I'll need an e-mail for PayPal. You are doing quite a lot of work keeping up with all the requests and questions.
Thanks for your diligence!!
However, what do you want for the track and (now comes my shipping question) can you figure out the shipping to New Mexico 88012?
In following this thread I see you work with PayPal. Since I am new to the forum (as in joined today) do you prefer private messages for details...and I'll need an e-mail for PayPal. You are doing quite a lot of work keeping up with all the requests and questions.
Thanks for your diligence!!
#96
Team Owner
Pro Mechanic
Thread Starter
Yes, the bread loaf. Let me know what you'd take for it with all mounting screws. I'm sure I need more parts but I'd like to lock down one of these. I just need to verify that my dash hasn't been mutilated. Had a crappy wood trim kit in it and aftermarket stereo stuff behind it that I will ultimately remove.
On that note I'm still interested in the Bose stuff, but it's lower priority on my to do list.
On that note I'm still interested in the Bose stuff, but it's lower priority on my to do list.
#97
Team Owner
Pro Mechanic
Thread Starter
I can't figure out shipping very accurately...and I haven't shipped the mirror or switch yet b/c I forgot the pig tail that you wanted w/the mirror yesterday.
Why don't you PP me the additional amount for the two PS trim pieces and I'll try to get it all shipped together in one package. If the amount is way above what you paid for shipping, we can talk about it but I don't think it will be.
For many of these parts, shipping cost is driven by size...not weight. So I can add more parts to the same box and not increase cost (up to a point).
Why don't you PP me the additional amount for the two PS trim pieces and I'll try to get it all shipped together in one package. If the amount is way above what you paid for shipping, we can talk about it but I don't think it will be.
For many of these parts, shipping cost is driven by size...not weight. So I can add more parts to the same box and not increase cost (up to a point).
#98
Team Owner
Pro Mechanic
Thread Starter
However, what do you want for the track and (now comes my shipping question) can you figure out the shipping to New Mexico 88012?
In following this thread I see you work with PayPal. Since I am new to the forum (as in joined today) do you prefer private messages for details...and I'll need an e-mail for PayPal. You are doing quite a lot of work keeping up with all the requests and questions.
Thanks for your diligence!!
In following this thread I see you work with PayPal. Since I am new to the forum (as in joined today) do you prefer private messages for details...and I'll need an e-mail for PayPal. You are doing quite a lot of work keeping up with all the requests and questions.
Thanks for your diligence!!
I'm looking for $100 each for the seat tracks (driver's one sold already) and it appears that shipping to your ZIP will be ~$55. Rip off.
I do have PP. I don't mind being public about it;
storm861triple@hotmail.com
...will work.
#99
Melting Slicks
Member Since: Nov 2013
Location: Greater Cincinnati Area.
Posts: 3,451
Received 335 Likes
on
295 Posts
I can't figure out shipping very accurately...and I haven't shipped the mirror or switch yet b/c I forgot the pig tail that you wanted w/the mirror yesterday.
Why don't you PP me the additional amount for the two PS trim pieces and I'll try to get it all shipped together in one package. If the amount is way above what you paid for shipping, we can talk about it but I don't think it will be.
For many of these parts, shipping cost is driven by size...not weight. So I can add more parts to the same box and not increase cost (up to a point).
Why don't you PP me the additional amount for the two PS trim pieces and I'll try to get it all shipped together in one package. If the amount is way above what you paid for shipping, we can talk about it but I don't think it will be.
For many of these parts, shipping cost is driven by size...not weight. So I can add more parts to the same box and not increase cost (up to a point).
Wife does the Pay Pal stuff. I'll get her to shoot it over to you when she gets a minute and if you can combine shipping on it all, that's great. If it comes to a few more bucks just let me know and I'll cover it.
Appreciate it!
PS: I just noticed this:
for the two PS trim pieces
Last edited by confab; 07-06-2017 at 07:10 PM.
#100
Team Owner
Pro Mechanic
Thread Starter
That's fine...but there are two pieces on each side; the one that you see the most, and the one under it that you only partially see, that is sort of the "track" for the roll up shade. Do you need both pieces or just the decorative/outer one?