Ken Linder

Sold

Pwnage1337

Does this help with roof flex on Coupes with the targa removed? Possible to add to coupes?

haljr

body flex is the reason they were add to the convertibles and yes does the same for the coupes

sb66

do you know what years this will fit on - I know some were for late 80's on - ?

Ken Linder

You can check your frame for the pre-drilled bolt holes. On the convertibles both front and back holes are present. On the coupes, the rear holes are not present from the factory; there is a 'pocket' in the frame that the block spacers fit into (the parking brake cable on the drivers side has a wire-like hanger there). To install the brace on a coupe, holes will need to be drilled and rivet nuts (Rivnuts) need to be installed so the block spacers and bolts can be installed. You can check your frame to find the front threaded holes. You can use the photo of the brace configuration to help find the front frame holes on your car.

haljr

late-'86 and newer c4 Corvette coupes already have the holes in place at the front as that was the first year for the convertible which GM realized they need an x brace and added them. coupe and convertible use the same frame. the x brace fit all year c4's

BV85

Ken Linder Where in SE MICH are you located. TIA

Ken Linder

Private message sent.

Torchred Vette

PM sent to Ken Linder.

Ken Linder

Yes, but just replied to a local person that has an interest. Will put you next in line if no sale.

Fastnail

Hey Ken,

Any chance you could send me the dimensions on the blocks used at the rear and the size on the front and rear bolts? I have a bracket, but the forum member I bought it from didn't have the blocks or bolts.

Cheers,

Mark

Ken Linder

Mark,

See attached pictures. I don't have Piece 9 (stud plate, floor).

Ken

Fastnail

Thanks for the info, Ken

Ken Linder

The cross brace has been sold. I will try the edit the ad soon or have it removed.

dakleenupman

Mike, are you looking for one? I got a guy local to me and Loren who has one for sale. Not sure he would ship it but I'll get you his number if you'd like.

Thesmith

Do you still have this?

What area do you call home? I'm near Akron in NE Ohio

Lyn Smith
330-434-6400

rappini

Ken, It appears I'm late to the party with my 92 C-4 looking for cross frame but I'm curious did you make that one in the picture?

Regards
Rappini

RPO Joe

Yeah, I know, this is an old thread, but @Ken Linder if you're still around, fabulous reply to Mark with the photos and all the dimensions, really above and beyond.

RPO Joe