WTB: Catback exhaust
03-10-2018, 09:10 AM
#1
Instructor
Thread Starter
Catback exhaust
Looking for bolt on catback exhaust. Maybe one you have swapped out for another or have laying around and need gone.
Not looking to get to crazy. I have a stock 91 L98 C4.
Thx Vetters
Ride on !
Not looking to get to crazy. I have a stock 91 L98 C4.
Thx Vetters
Ride on !
Last edited by clove86; 03-10-2018 at 09:11 AM.
03-11-2018, 03:23 PM
#2
Le Mans Master
I have a cat back from an 89 that has been sitting for about 10 years that is all stainless steel. I believe the exhaust is the same for the 89-91 years. the mufflers are Borla's with square zr-1 tips and the rear y-pipe is 2 1/4" stainless.
fwiw, I also have the front y-pipe in 2 1/2" stainless the has been jet hot coated.
$500 for all, including a catalytic converter with just a couple thousand miles.
fwiw, I also have the front y-pipe in 2 1/2" stainless the has been jet hot coated.
$500 for all, including a catalytic converter with just a couple thousand miles.
03-11-2018, 09:19 PM
#3
Instructor
Thread Starter
I have a cat back from an 89 that has been sitting for about 10 years that is all stainless steel. I believe the exhaust is the same for the 89-91 years. the mufflers are Borla's with square zr-1 tips and the rear y-pipe is 2 1/4" stainless.
fwiw, I also have the front y-pipe in 2 1/2" stainless the has been jet hot coated.
$500 for all, including a catalytic converter with just a couple thousand miles.
fwiw, I also have the front y-pipe in 2 1/2" stainless the has been jet hot coated.
$500 for all, including a catalytic converter with just a couple thousand miles.
Do you have any pictures?
We can take this pm if needed
03-18-2018, 08:57 PM
#12
Drifting
Member Since: Mar 2017
Location: Nashville TN
Posts: 1,897
Received 164 Likes
on
136 Posts
2017 C4 of Year Finalist
Got under my car this weekend-looks like it's not bolt-on after all, but was welded to the existing exhaust. I could cut it out but you'd probably have to weld it back on to your car.
...did I mention I'd let it go cheaply...?
...did I mention I'd let it go cheaply...?
03-18-2018, 09:55 PM
#13
Le Mans Master
i'm just north of Houston, texas. I will get all this broken apart and locate some boxes to get a quote. by the way, I also have a pair of exhaust manifolds from the 89 that have been relieved at the exhaust port and the covers have been jet hot coated. if you're interested.
03-21-2018, 05:12 PM
#15
Instructor
Thread Starter
But thank you for your trouble
03-21-2018, 09:40 PM
#16
Le Mans Master
by the way, I also have a pair of exhaust manifolds from the 89 that have been relieved at the exhaust port and the covers have been jet hot coated. if you're interested.
03-25-2018, 09:55 PM
#17
Le Mans Master
here are some new pics of the manifolds and some others to answer your questions.
pic of the exhaust manifolds. both the manifolds and the covers were jet hot coated.
pic of the exhaust manifolds opposite side.
pic of the muffler attachment.
pic of the exhaust o2 sensor bung.
everything is ready to take to ups to get a shipping quote.
pic of the exhaust manifolds. both the manifolds and the covers were jet hot coated.
pic of the exhaust manifolds opposite side.
pic of the muffler attachment.
pic of the exhaust o2 sensor bung.
everything is ready to take to ups to get a shipping quote.
04-04-2018, 04:09 PM
#20
Le Mans Master