FS: Complete Superram
#1
Racer
Thread Starter
Complete Superram
Complete Accel / Lingenfelter SuperRam Intake (not ported) WITH Throttle Body for L98/TPI Engines
Comes with:
Accel stamped BASE plus RUNNERS plus PLENUM
1000 CFM twin 58 mm billet aluminum throttle body ($550 MSRP https://www.mamotorworks.com/corvett...00cfm-618586-1)
Fuel rails, with 28 lb injectors (injectors sat & probably should be changed)
Billet polished aluminum EGR plates
Throttle / kick down linkage bracket, & new springs
New adjustable TPS sensor
New IAC sensor (under plenum)
New IAC motor
New temperature sending unit.
All New gaskets.
Custom paint scheme (parts were boiled, primed and painted in high heat temp paint, and oven baked). Paint has held up over time and is still in good condition.
You can do the math on all of these parts combined, compared to listings that only sell plenum/runners (assuming you can even find the more rare parts needed for this unit to work).
$1070 shipped, or local pickup in Socal for $970 ($100 discount).
Comes with:
Accel stamped BASE plus RUNNERS plus PLENUM
1000 CFM twin 58 mm billet aluminum throttle body ($550 MSRP https://www.mamotorworks.com/corvett...00cfm-618586-1)
Fuel rails, with 28 lb injectors (injectors sat & probably should be changed)
Billet polished aluminum EGR plates
Throttle / kick down linkage bracket, & new springs
New adjustable TPS sensor
New IAC sensor (under plenum)
New IAC motor
New temperature sending unit.
All New gaskets.
Custom paint scheme (parts were boiled, primed and painted in high heat temp paint, and oven baked). Paint has held up over time and is still in good condition.
You can do the math on all of these parts combined, compared to listings that only sell plenum/runners (assuming you can even find the more rare parts needed for this unit to work).
$1070 shipped, or local pickup in Socal for $970 ($100 discount).
Last edited by bolowbc; 01-15-2019 at 08:43 AM. Reason: Pricing
#3
Interested
Complete Accel / Lingenfelter SuperRam Intake (not ported) WITH Throttle Body for L98/TPI Engines
Here's the info I have on it. Comes with:
Accel stamped BASE plus RUNNERS plus PLENUM
1000 CFM twin 58 mm billet aluminum throttle body
Fuel rails, with 28 lb injectors (injectors sat & probably should be changed)
Billet polished aluminum EGR plates
Throttle / kick down linkage bracket, & new springs
New adjustable TPS sensor
New IAC sensor (under plenum)
New IAC motor
New temperature sending unit.
All New gaskets.
Custom paint scheme (parts were boiled, primed and painted in high heat temp paint, and oven baked). Paint has held up over time and is still in good condition.
You can do the math on all of these parts combined, compared to listings that only sell plenum/runners (assuming you can even find the more rare parts needed for this unit to work).
$1420 shipped, or local pickup in Socal for $1320 ($100 discount).
Here's the info I have on it. Comes with:
Accel stamped BASE plus RUNNERS plus PLENUM
1000 CFM twin 58 mm billet aluminum throttle body
Fuel rails, with 28 lb injectors (injectors sat & probably should be changed)
Billet polished aluminum EGR plates
Throttle / kick down linkage bracket, & new springs
New adjustable TPS sensor
New IAC sensor (under plenum)
New IAC motor
New temperature sending unit.
All New gaskets.
Custom paint scheme (parts were boiled, primed and painted in high heat temp paint, and oven baked). Paint has held up over time and is still in good condition.
You can do the math on all of these parts combined, compared to listings that only sell plenum/runners (assuming you can even find the more rare parts needed for this unit to work).
$1420 shipped, or local pickup in Socal for $1320 ($100 discount).
#8
Racer
Thread Starter
#11
Racer
Thread Starter
#15
Team Owner
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Paint shouldnt hurt the sale, easily fixed. Less than most guys are asking thats for sure.
#20
Racer
Thread Starter
PM replied; you are first in line.
PM replied; you are second in line.
I think so too, thanks for the bump!
Yes I thought the price was pretty fair too considering the throttle body and all of the parts included!
The original post has the latest pricing which is $1070 shipped and $970 local pickup.
Thanks, you are third in line.
PM replied; you are second in line.
The original post has the latest pricing which is $1070 shipped and $970 local pickup.
Thanks, you are third in line.