Power Brakes and vaccuum
08-03-2001, 06:46 PM
#1
Burning Brakes
Thread Starter
Power Brakes and vaccuum
Is anybody aware of a 'typical failure mode' for power brakes? The sled has SOME assist, but there's no 'sucking' noise, like if the the diaphragm were ripped. The Booster is a reman unit and it's only about two years old.
Further, what's usual vacuum for idle? This thing's showing 14 inHg. at the resevoir under the left front headlight at 900 rpm.
Further, what's usual vacuum for idle? This thing's showing 14 inHg. at the resevoir under the left front headlight at 900 rpm.
