Porting 84 crossfire?????????
#1
Advanced
Thread Starter
Member Since: Jul 2002
Location: Spring Lake bc
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Porting 84 crossfire?????????
How do you go about porting an intake manifold on a 84 vette?
Is there certain steps to go by?
When removing the lower part of manifold can you leave the top plate with everything attached(injectors, etc) sitting there and slide the lower part out? I don't want to have to take everything off the top. Afraid I might screw things up.
Is there certain steps to go by?
When removing the lower part of manifold can you leave the top plate with everything attached(injectors, etc) sitting there and slide the lower part out? I don't want to have to take everything off the top. Afraid I might screw things up.
#2
Instructor
Member Since: Feb 2004
Location: SWEDEN 1984 c4 with Edelbrock RPM toppkit
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
#3
Pro
Member Since: Dec 2002
Location: 84 383 XFire Chandler, AZ
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
As Stefan pointed out go check out the Crossfire Forum. Lots of good info and assistance.
You will not screw anything up by removing the TBs from the top plate. It would be a good idea go get some gaskets and O rings and rebuild the tbs anyway. There really is not much there in the way of parts. No springs to worry about etc. The only item is rebalancing the TBs and you can find instructions on how to do that at the Crossfire Forum. It is not all that difficult.
You will not screw anything up by removing the TBs from the top plate. It would be a good idea go get some gaskets and O rings and rebuild the tbs anyway. There really is not much there in the way of parts. No springs to worry about etc. The only item is rebalancing the TBs and you can find instructions on how to do that at the Crossfire Forum. It is not all that difficult.
#5
Race Director
Member Since: Sep 2000
Location: The Top of Utah
Posts: 17,298
Likes: 0
Received 23 Likes
on
22 Posts
Originally Posted by 84 BRONZEBOMBER
When removing the lower part of manifold can you leave the top plate with everything attached(injectors, etc) sitting there and slide the lower part out? I don't want to have to take everything off the top. Afraid I might screw things up.
RACE ON!!!