Smoking gas recirculation line from header
#1
Smoking gas recirculation line from header
The other day the abestos cover on the gas recirculation tube started to smoke. Thought it was somekinf from oil or some other fluid but there appears to be nothinng on the mesh itself. The mesh is turning back so i guess it is actually starting to cook from the heat. What would cause the excessive heat ? this just started a few days ago. Any help would be appreciated. Also noticed now its hard to start when Hot.
Could it be a leaky injector , or EGR Valve, and other thoughts would be appreciate.
15000 miles on rebuild with hotcam .
LD
Could it be a leaky injector , or EGR Valve, and other thoughts would be appreciate.
15000 miles on rebuild with hotcam .
LD
#2
Race Director
Member Since: Sep 2000
Location: The Top of Utah
Posts: 17,298
Likes: 0
Received 23 Likes
on
22 Posts
Originally Posted by larrycombs
Could it be a leaky injector , or EGR Valve, and other thoughts would be appreciate.
RACE ON!!!
#3
Drifting
I'm not certain, but I think that a leak could cause a problem and cracks do develop, especially in the accordian section if it is moved. I say that I'm not certain because I'm not sure if the gases would be any hotter than the tube and therefore not certain that their escaping into the shield at a single point would cause it to exceed its normal range. Perhaps someone has direct experience.
#5
Race Director
Member Since: Sep 2000
Location: The Top of Utah
Posts: 17,298
Likes: 0
Received 23 Likes
on
22 Posts
Originally Posted by larrycombs
Thanks, no trouble codes as of yet . Motor runs good. Beats me whats going on.
Originally Posted by larrycombs
Could it be a leaky injector , or EGR Valve, and other thoughts would be appreciate.
RACE ON!!!