Paging DavidF-wipers don't work-86 Vette
#1
Drifting
Thread Starter
Member Since: Aug 2000
Location: Houston, TX
Posts: 1,316
Likes: 0
Received 0 Likes
on
0 Posts
Paging DavidF-wipers don't work-86 Vette
David, I have an 86 Vette, replaced the switch, but still no power to the wiring at the wiper motor when the switch is on. I have voltage at the fuse. Where could I be losing voltage in the wiring?
Thanks for your help
Thanks for your help
#3
Drifting
Re: Paging DavidF-wipers don't work-86 Vette (HWoods)
Sorry it has taken so long to get back I did not find out untill this afternoon that was a question out there for me. Let's get back to the begining, you said that you have power at the fuse, that's good but do you have power to the switch? You should have power to the white wire going to the switch with the key on. Then with the switch on low you should have power to the light blue wire and some also to the brown wire, with the switch on high you will also get power to the purple wire. If that looks good go to the wiper motor and check there for the same thing and let me know what you find out, then we will see were to go from there.
David Fulcher
David Fulcher