Stock LT1 Exhaust vs With Added X-Pipe
#23
Racer
Member Since: Feb 2008
Location: Mechanicsburg PA
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Completely Stock 95' LT1 Exhaust then with the Resonator Removed and added a
3" Flowmonster X-Pipe Only.
http://www.youtube.com/watch?v=iCZYAgz4V1g
I think it Makes the Stock Exhaust Sound Awsome. Louder, Lower and with no Drone whatsoever.
What do you think?
Dennis
3" Flowmonster X-Pipe Only.
http://www.youtube.com/watch?v=iCZYAgz4V1g
I think it Makes the Stock Exhaust Sound Awsome. Louder, Lower and with no Drone whatsoever.
What do you think?
Dennis
#24
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts
I paid $42.88 for the X-Pipe and $130.00 for Installation (2 Hrs.Parts & Labor)
http://www.flowmonster.com/Xpipes.aspx
This one looks identical to the Flowmonster for less $$$$
http://cgi.ebay.com/ebaymotors/2-5-i...Q5fAccessories
Plus 1-2 MPG Increase and pulls stronger over 4,000 RPM
http://www.flowmonster.com/Xpipes.aspx
This one looks identical to the Flowmonster for less $$$$
http://cgi.ebay.com/ebaymotors/2-5-i...Q5fAccessories
Plus 1-2 MPG Increase and pulls stronger over 4,000 RPM
see www.flowmonster.com My above thread gives a link to Ebay that looks exactly like the Flowmonster but Cheaper.
Dennis
#25
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts
http://i767.photobucket.com/albums/x...4/PICT0162.jpg
http://i767.photobucket.com/albums/x...4/PICT0163.jpg
http://i767.photobucket.com/albums/x...4/PICT0161.jpg
http://i767.photobucket.com/albums/x...4/PICT0164.jpg
http://i767.photobucket.com/albums/x...4/PICT0165.jpg
http://i767.photobucket.com/albums/x...4/PICT0166.jpg
Pictures of My X-Pipe Install
http://i767.photobucket.com/albums/x...4/PICT0163.jpg
http://i767.photobucket.com/albums/x...4/PICT0161.jpg
http://i767.photobucket.com/albums/x...4/PICT0164.jpg
http://i767.photobucket.com/albums/x...4/PICT0165.jpg
http://i767.photobucket.com/albums/x...4/PICT0166.jpg
Pictures of My X-Pipe Install
Last edited by CAJUN C4; 04-29-2010 at 06:05 PM.
#27
i think the muffler delete sounds more aggresive, i wonder how the x pipe and mufflers delete would sound..............probably kind of raspy........but then again there are still 2 converters left.......hmmm
#28
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts
I really Love the X-Pipe.Not too loud,not too quite.perfect for a 61 Yr. Old Kid..LOL
#29
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts
X-Pipe would almost eliminate the drone.You might post it I believe someone else has done the exact thing.
#31
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts
#32
Safety Car
#33
Racer
Member Since: Feb 2008
Location: Mechanicsburg PA
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
#34
Drifting
Member Since: Aug 2004
Location: 2010 C6 Grand Sport Convertible
Posts: 1,321
Likes: 0
Received 4 Likes
on
4 Posts
I would do a sound\video clip but it would sound just like yours Dennis I will tell you whether or not it was worth the $$. I'll give you a hint.......I opened the magnaflow box and checked the X-pipe out. I could see light pouring thru both un-spot welded seams between the X legs. Apparantly these pipes are stamped as halves then spot welded together. Apparantly mine was made on a Monday.
Mike
Mike
Last edited by 78pacer; 04-30-2010 at 09:17 PM.
#35
Le Mans Master
I did the muffler eliminators on my 93 LT1, they sound great.
Looking for exhaust solutions for my 94 LT5 I figured if the elims sounded so good on the LT1 had to be good for the LT5 too.
Turned out not as good. Was better than the Borla that came with the car. Last summer I replaced the Borla resonator with an X pipe. Turned out great, sounds aggressive when you are getting on it and you can drive it fairly quiet too. I have to get around to posting a sound clip
#36
Safety Car
Member Since: Dec 2007
Location: Sandhills of North Carolina
Posts: 3,616
Likes: 0
Received 5 Likes
on
4 Posts
I would do a sound\video clip but it would sound just like yours Dennis I will tell you whether or not it was worth the $$. I'll give you a hint.......I opened the magnaflow box and checked the X-pipe out. I could see light pouring thru both un-spot welded seams between the X legs. Apparantly these pipes are stamped as halves then spot welded together. Apparantly mine was made on a Monday.
Mike
Mike
#37
Drifting
Member Since: Aug 2004
Location: 2010 C6 Grand Sport Convertible
Posts: 1,321
Likes: 0
Received 4 Likes
on
4 Posts
As an update....I brought the vete to a muffler shop and they showed me the Magnaflow was way too wide. That fact and the result of the non-existant final welding on the X-pipe prompted me to send it back to them. What a pos! The shop luckily had a 2.5" X-pipe in stock, so in an hours time, they were done. The cost was $90 for the pipe and $70 labor. It was a quality job at a fair price. I'm pissed at Magnaflow for letting such a turd out the door. Customer service is paying for return shipping.
The sound is tamer than I'd like, juat a tad over stock, but has zero drone. The jury is still out on whether or not it was worth the $160.
Mike
The sound is tamer than I'd like, juat a tad over stock, but has zero drone. The jury is still out on whether or not it was worth the $160.
Mike
Last edited by 78pacer; 05-05-2010 at 01:55 PM.
#38
As an update....I brought the vete to a muffler shop and they showed me the Magnaflow was way too wide. That fact and the result of the non-existant final welding on the X-pipe prompted me to send it back to them. What a pos! The shop luckily had a 2.5" X-pipe in stock, so in an hours time, they were done. The cost was $90 for the pipe and $70 labor. It was a quality job at a fair price. I'm pissed at Magnaflow for letting such a turd out the door. Customer service is paying for return shipping.
The sound is tamer than I'd like, juat a tad over stock, but has zero drone. The jury is still out on whether or not it was worth the $160.
Mike
The sound is tamer than I'd like, juat a tad over stock, but has zero drone. The jury is still out on whether or not it was worth the $160.
Mike
The following users liked this post:
Larry0101 (03-10-2022)
#40
Safety Car
Thread Starter
Member Since: Feb 2000
Location: MANDEVILLE, LA La
Posts: 3,771
Likes: 0
Received 0 Likes
on
0 Posts